*Heading
** Job name: SlipRing Model name: SlipRing Test
** Generated by: Abaqus/CAE 6.10-1
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=A
*Node
      1,           0.,           0.,           0.
*Nset, nset=A-RefPt_, internal
1, 
*Nset, nset=A
 1,
*End Part
**  
*Part, name=B
*Node
      1,           0.,           0.,           0.
*Nset, nset=B-RefPt_, internal
1, 
*Nset, nset=A
 1,
*End Part
**  
*Part, name=C
*Node
      1,           0.,           0.,           0.
*Nset, nset=C-RefPt_, internal
1, 
*Nset, nset=A
 1,
*End Part
**  
*Part, name=Würfel
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Würfel-1, part=Würfel
*Node
      1,         -10.,         -10.,          20.
      2,         -10.,          10.,          20.
      3,         -10.,         -10.,           0.
      4,         -10.,          10.,           0.
      5,          10.,         -10.,          20.
      6,          10.,          10.,          20.
      7,          10.,         -10.,           0.
      8,          10.,          10.,           0.
*Element, type=C3D8R
1, 5, 6, 8, 7, 1, 2, 4, 3
*Node
      9,           0.,          10.,          10.
*Nset, nset=Würfel-1-RefPt_, internal
9, 
*Nset, nset=_PickedSet4, internal, generate
 1,  8,  1
*Elset, elset=_PickedSet4, internal
 1,
** Section: Würfel
*Solid Section, elset=_PickedSet4, material="Fictional Mat"
,
*End Instance
**  
*Instance, name=A-1, part=A
          0.,          30.,          10.
*End Instance
**  
*Instance, name=B-1, part=B
          0.,         100.,          10.
*End Instance
**  
*Instance, name=C-1, part=C
         70.,         100.,          10.
*End Instance
**  
*Element, type=CONN3D2
4, Würfel-1.9, A-1.1
*Connector Section, elset=_PickedSet14
Slipring,

1.05e-09, 
*Element, type=CONN3D2
5, A-1.1, B-1.1
*Connector Section, elset=_PickedSet16
Slipring,

1.05e-09, 
*Element, type=CONN3D2
6, B-1.1, C-1.1
*Connector Section, elset=_PickedSet17
Slipring,

1.05e-09, 
*Nset, nset=_PickedSet11, internal, instance=Würfel-1
 9,
*Nset, nset=Wire-1-Set-1, instance=B-1
 1,
*Nset, nset=Wire-1-Set-1, instance=C-1
 1,
*Nset, nset=Wire-1-Set-1, instance=A-1
 1,
*Nset, nset=Wire-1-Set-1, instance=Würfel-1
 9,
*Elset, elset=Wire-1-Set-1, generate
 4,  6,  1
*Elset, elset=_PickedSet14, internal
 4,
*Elset, elset=_PickedSet16, internal
 5,
*Elset, elset=_PickedSet17, internal
 6,
*Nset, nset=_PickedSet18, internal, instance=A-1
 1,
*Nset, nset=_PickedSet18, internal, instance=B-1
 1,
*Nset, nset=_PickedSet19, internal, instance=Würfel-1
 9,
*Nset, nset=_PickedSet19, internal, instance=C-1
 1,
*Nset, nset=_PickedSet22, internal, instance=C-1
 1,
*Elset, elset=__PickedSurf10_S1, internal, instance=Würfel-1
 1,
*Elset, elset=__PickedSurf10_S6, internal, instance=Würfel-1
 1,
*Elset, elset=__PickedSurf10_S2, internal, instance=Würfel-1
 1,
*Elset, elset=__PickedSurf10_S4, internal, instance=Würfel-1
 1,
*Elset, elset=__PickedSurf10_S3, internal, instance=Würfel-1
 1,
*Elset, elset=__PickedSurf10_S5, internal, instance=Würfel-1
 1,
*Surface, type=ELEMENT, name=_PickedSurf10, internal
__PickedSurf10_S1, S1
__PickedSurf10_S6, S6
__PickedSurf10_S2, S2
__PickedSurf10_S4, S4
__PickedSurf10_S3, S3
__PickedSurf10_S5, S5
** Constraint: KinCoup_Würfel
*Coupling, constraint name=KinCoup_Würfel, ref node=_PickedSet11, surface=_PickedSurf10
*Kinematic
*Element, type=MASS, elset=_PickedSet15_Mass_
1, A-1.1
2, B-1.1
3, C-1.1
*Mass, elset=_PickedSet15_Mass_
1e-05, 
*End Assembly
*Amplitude, name=Smooth, definition=SMOOTH STEP
          0.,           0.,           1.,           1.
** 
** MATERIALS
** 
*Material, name="Fictional Mat"
*Density
 2e-08,
*Elastic
1000., 0.3
** 
** BOUNDARY CONDITIONS
** 
** Name: FLOW Type: Connector material flow
*Boundary
_PickedSet19, 10, 10
** Name: PIN Type: Symmetry/Antisymmetry/Encastre
*Boundary
_PickedSet18, PINNED
** ----------------------------------------------------------------
** 
** STEP: Bewegung
** 
*Step, name=Bewegung
*Dynamic, Explicit, direct user control
0.005, 1.
*Bulk Viscosity
0.06, 1.2
** 
** LOADS
** 
** Name: FORCE   Type: Concentrated force
*Cload
_PickedSet22, 1, 220.
** Name: Gravity   Type: Gravity
*Dload
, GRAV, 9810., 0., -1., 0.
** 
** OUTPUT REQUESTS
** 
*Restart, write, number interval=1, time marks=NO
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field, variable=PRESELECT
** 
** HISTORY OUTPUT: H-Output-1
** 
*Output, history, variable=PRESELECT
*End Step