; HP-GL/2 Plotter configuration file - For HP 650c Color Plotter

;       $Logfile:   I:/mgds/plot/pltcfg/hp650c.plt  $
;       $Workfile:   hp650c.plt  $
;       $Revision:   1.6  $
;   If you change this file, please do not disturb the above source control
;   information. It will prove useful in the event that a future release
;   changes this file.

; MicroStation starts counting pens at 1, so even though the HP 650c has
; pens 0 through 255, pen 0 is not used by MicroStation.
num_pens   = 20                 ; Defines pens used - max value is 255
change_pen = level              ; options are color, weight, level or both
model      = HPGL2              ; plotter model
driver     = hpgl2
autocenter                      ; Automatically center plot on page
end_plot   = eject              ; Performs page eject
rotate     = cw                         ; clockwise rotation
default_extension = 'hpd'       ; default extension for plotfiles
border/pen=1/filename/time      ; leave this out for no border
communication=(handshake=1,baud=9600,par=none,data=8,stop=1)


; The SIZE records defines the plotting area of page.  The .27 offset
; given is to allow room for the border record.
; Use the first set when using roll paper and the second set for cut paper.
; Only 5 SIZE records can be defined at one time

; ENGLISH SIZE records
;size=(210,297)/num=0/off=(0.27,0.27)/name=A4
;size=(420,594)/num=0/off=(0.27,0.27)/name=A3

;Seitengrößen für Lagepläne OHNE Eigentümerliste im Plankopf
size=(1042.4,297)/num=0/off=(0.27,0.27)/name=rest
size=(857.4,297)/num=0/off=(0.27,0.27)/name=3a,b
size=(1227.4,297)/num=0/off=(0.27,0.27)/name=1+4a,5ab
size=(1227.5,297)/num=0/off=(0.27,0.27)/name=1

;Seitengrößen für Lagepläne MIT Eigentümerliste im Plankopf
;size=(1505,297)/num=0/off=(0.27,0.27)/name=4B
;size=(1412.5,297)/num=0/off=(0.27,0.27)/name=4A,5B
;size=(1320,297)/num=0/off=(0.27,0.27)/name=1A,5A
;size=(1228,297)/num=0/off=(0.27,0.27)/name=6A,6B_1
;size=(1135,297)/num=0/off=(0.27,0.27)/name=rest
;size=(950,297)/num=0/off=(0.27,0.27)/name=3A,3B


resolution(MM)=(0.025,0.025)    ; specifies both res and units



; HÖHERE STIFRNUMMER DECKT !!! 
pen(20) = (1-63) / RGB=(0,0,0)		;SCHWARZ

pen(1) = (49)   / RGB=(127,127,127) 	;LOGO RWE - GRAU
pen(2) = (50)  / RGB=(0,168,255) 	;LOGO Hand - BLAU
pen(19) = (56,57)   / RGB=(0,255,0) 	;GRÜN Gemarkung/Gemeinde
pen(18) = (58) / RGB =(0,0,255) 	;BLAU Kreis 
pen(17) = (55)   / RGB=(115,0,255)	;VIOLETT Flur
pen(16) = (59) / RGB=(255,0,0)		;ROT Landesgrenze

pen(16) = (60) / RGB=(255,0,0) 		;ROT Ltg., Bemaßung etc.
pen(14) = (48,50,51)   / RGB=(255,255,168) ;HELLGELB Fläche


;pen(15) = (41,42,43,44,48)   / RGB=(233,233,233) 	;HELLGRAU Flächen
;pen(15) = (3,4,14,6)   / RGB=(230,105,0)   ; Planung B14


pen_width(1)=7
pen_width(2)=7
pen_width(3)=20
pen_width(4)=20
pen_width(5)=10
pen_width(6)=14
pen_width(7)=14
pen_width(8)=20
pen_width(9)=10
pen_width(10)=14
pen_width(11)=10
pen_width(12)=10

style(1) = (150,42)/nohardware                 ; style = dot
style(2) = (190,42)/nohardware                 ; style = med dash
style(3) = (220,56)/nohardware                 ; style = long dash
style(4) = (150,42,28,42)/nohardware           ; style = dot-dash
style(5) = (27,35)/nohardware                  ; style = short dash
style(6) = (190,42,28,42,28,42)/nohardware     ; style = dash-dot-dot
style(7) = (190,42,150,42)/nohardware          ; style = long dash-short dash

weight_strokes=(11,15,20,25,35,40,45,50,55,60,65,70,75,80,85,90,95,100,
		 105,110,115,120,125,130,135,140,145,150,155,160,165)

stroke_tolerance = 4.5

linecap   = 1               ; 1=butt; 2=spuare, 3=triangle, 4=round 
linejoin  = 2               ; 1=mitered, 2=miter/bevel, 3=triangle,
			    ; 4=round, 5=beveled, 6=no join
miter_limit = 1.5           ; larger values mean longer spikes

largest_polygon=512