/COM,ANSYS RELEASE 14.5    UP20120918       12:58:29    03/03/2014

 *** WARNING ***                         CP =       2.371   TIME= 12:58:32
 Element shape checking is currently inactive.  Issue SHPP,ON or         
 SHPP,WARN to reactivate, if desired.                                    

 *** WARNING ***                         CP =       5.164   TIME= 12:58:35
 Material number 8 (used by element 15980 ) should normally have at      
 least one MP or one TB type command associated with it.  Output of      
 energy by material may not be available.                                

 *** WARNING ***                         CP =       9.937   TIME= 12:58:38
 Coefficient ratio exceeds 1.0e8 - Check results.                        

 *** WARNING ***                         CP =      23.119   TIME= 12:58:53
 A reference force value times the tolerance is used by the              
 Newton-Raphson method for checking convergence.  The calculated         
 reference FORCE CONVERGENCE VALUE = 2.619569762E-18 is less than a      
 threshold.  This threshold defaults to 1.0-2 or is specified as MINREF  
 on the CNVTOL command.  Check results carefully.                        

 *** WARNING ***                         CP =      45.661   TIME= 12:59:14
 A reference force value times the tolerance is used by the              
 Newton-Raphson method for checking convergence.  The calculated         
 reference FORCE CONVERGENCE VALUE = 6.371428851E-19 is less than a      
 threshold.  This threshold defaults to 1.0-2 or is specified as MINREF  
 on the CNVTOL command.  Check results carefully.                        

 *** WARNING ***                         CP =      67.907   TIME= 12:59:37
 A reference force value times the tolerance is used by the              
 Newton-Raphson method for checking convergence.  The calculated         
 reference FORCE CONVERGENCE VALUE = 2.630174425E-19 is less than a      
 threshold.  This threshold defaults to 1.0-2 or is specified as MINREF  
 on the CNVTOL command.  Check results carefully.                        

 *** WARNING ***                         CP =      90.746   TIME= 12:59:59
 A reference force value times the tolerance is used by the              
 Newton-Raphson method for checking convergence.  The calculated         
 reference FORCE CONVERGENCE VALUE = 4.258429594E-16 is less than a      
 threshold.  This threshold defaults to 1.0-2 or is specified as MINREF  
 on the CNVTOL command.  Check results carefully.                        

 *** WARNING ***                         CP =      95.831   TIME= 13:00:03
 Material number 8 (used by element 15980 ) should normally have at      
 least one MP or one TB type command associated with it.  Output of      
 energy by material may not be available.                                

 *** WARNING ***                         CP =     244.282   TIME= 13:02:29
 Material number 8 (used by element 15980 ) should normally have at      
 least one MP or one TB type command associated with it.  Output of      
 energy by material may not be available.                                

 *** WARNING ***                         CP =     429.845   TIME= 13:05:55
 During this session the elapsed time exceeds the CPU time by 58%.       
 Often this indicates either a lack of physical memory (RAM) required    
 to efficiently handle this simulation or it indicates a particularly    
 slow hard drive configuration.  This simulation can be expected to run  
 faster on identical hardware if additional RAM or a faster hard drive   
 configuration is made available.  For more details, please see the      
 ANSYS Performance Guide which is part of the ANSYS Help system.