! ========== INTRALINK Einstellungen ==================================== save_bitmap none save_model_display shading_lod save_drawing_picture_file embed !check_intralink_attributes no ! ========== Einstellungen ============================================== clock no bell no cutout_color 255 0 0 axis_display yes datum_display yes datum_point_display yes datum_point_symbol cross datum_point_tag_display yes display_coordinate_sys yes display hiddenvis display_silhouette_edges yes orientation trimetric tangent_edge_display dimmed save_objects changed_and_specified ! ========== Fangradius ================================================= pick_aperture_radius 7 ! ========== Einheiten ================================================== pro_unit_length unit_mm pro_unit_mass unit_kilogram ang_units ang_deg default_dec_places 3 dim_fraction_denominator 10 accuracy_lower_bound 1.0e-6 clr_print_plus_minus no measure_sig_figures 6 ! ========== Toleranzen ================================================= tol_display yes tolerance_class medium tol_mode nominal tolerance_standard ISO linear_tol 1 linear_tol_0.0 1 linear_tol_0.00 5 linear_tol_0.000 5 angular_tol 1 angular_tol_0.0 1 angular_tol_0.00 5 angular_tol_0.000 5 gtol_dim_placement under_value allow_rfs_default_gtols_always yes ! ========== Skizziermodus ============================================== sketcher_starts_in_2d yes sketcher_animated_modify yes dim_offscreen_limit 1.33 grid_snap no use_dimensioned_edges yes select_on_dtm_edges all_modes sketcher_dec_places 2 fit_object_in_window no ! war auf YES, aber in Rel20 gibt es sonst Probleme ! ========== Tastatur =================================================== kbd_cmd_abbreviation off native_kbd_macros no ! ========== Darstellung der 3D - Ansichten =========================== spin_center_display yes spin_with_part_entities no spin_with_silhouettes no ! ========== Systemfarben ============================================== mesh_spline_surf no color_ramp_size 5 color on default_ramp_size 10 system_edge_high_color 100 100 0 ! gelb ! ========== Menue ====================================================== allow_confirm_window yes prompt_on_exit yes menu_show_instances yes menu_horizontal_hint right thermo_position_hint no_window_overlap !independent_menus no fonts_size large !tree_placement left overlays_enabled no old_style_sizing no enable_design_mgr_ui yes reserved_menu_space 1 set_menu_width 5 !menuitem_font 9x15bold menu_translation yes help_translation yes msg_translation yes visible_message_lines 2 button_name_in_help no ! ========== Speichern/Aufrufen ========================================= override_store_back no save_object_in_current no compress_output_files yes save_instance_accelerator none save_unchanged_pdm_object as_ref let_proe_rename_pdm_objects yes save_display no retain_display_memory yes auto_regen_views yes rename_drawings_with_object none propagate_change_to_parents no retain_pattern_definition yes regen_backup_using_disk no ! ========== Zeichnung ================================================== variant_drawing_item_sizes yes dwg_select_across_pick_box no draw_models_read_only no draw_points_in_model_units no model_grid_neg_prefix - model_grid_num_dig integer make_parameters_from_fmt_tables no remember_last_get_point_option yes chamfer_45deg_dim_text iso/din disp_trimetric_dwg_mode_view yes display_in_adding_view wireframe force_wireframe_in_drawings no hlr_for_quilts yes make_proj_view_notes no remove_unused_tol_tables no model_grid_spacing 10 ! ========== Bemassung =================================================== create_drawing_dims_only yes highlight_new_dims yes allow_move_attach_in_dtl_move yes parenthesize_ref_dim yes sym_leader_orient_move_text no display_dwg_tol_tags yes switch_dims_for_notes yes symbol_palette_input yes default_draw_scale no cdt_transfer_details no create_fraction_dim no ! ========== Schnittstellen - Pro/Interface ============================= www_export_geometry_as all fix_boundaries_on_import yes intf_in_blanked_entities yes intf_in_treat_polyline_as single_polyline intf3d_in_close_open_boundaries yes intf3d_in_include_items srfs_crvs_pnts intf_out_blanked_entities yes intf3d_out_datums_by_default no intf3d_out_default_option surfaces intf3d_out_extend_surface yes intf3d_out_surface_deviation 150 intf3d_out_force_surf_normals no intf_out_max_bspl_degree 16 copy_dxf_dim_pict no fix_autocad_iges_text_scale yes fix_catia_iges_sym_note yes auto_associate_dimensions yes iges_clip_view_note no_clip iges_note_disp as_geometry recompute_iges_dim_value no put_iges_drawing_entity yes use_iges_font_1003 yes company_name XXXXXX explode_iges_dimension_note no iges_zero_view_disp all_views iges_in_106_f2_as_spline no iges_in_assoc_dim_geom_21 yes iges_in_dwg_color no iges_in_dwg_line_font no iges_in_dwg_view no iges_in_group_to_dwg_layer yes iges_out_all_srfs_as default iges_out_assembly_default_mode flat iges_out_catia_gdt_width yes iges_out_catia_notes no iges_out_dwg_color no iges_out_dwg_line_font no iges_out_dwg_pnt_ent no iges_out_ent_as_bspline true iges_out_jamais_compliant no iges_out_spl_crvs_as_126 yes iges_out_spl_srfs_as_128 yes iges_out_start_note no iges_out_symbol_entity yes iges_out_trim_xyz yes iges_out_trim_curve_deviation default iges_out_trm_srfs_as_143 no read_vda_in_pset_as_spline yes fix_imported_set_view_orient no step_export_format ap203_is supertab_mesh_geom no ! ========== Rohrleitung - Piping ======================================= pipe_solid_centerline yes ! ========== Blechbearbeitung - Sheetmetal ============================== initial_bend_y_factor .785398 punch_axis_points yes ! ========== Allgemeines ================================================ allow_old_style_round yes keep_info_datums no display_full_object_path no lang_propagate no repeat_datum_create yes pick_chain_tangent_only no set_trail_single_step no trail_delay 0.5 show_axes_for_extr_arcs yes flip_arrow_scale 1.5 provide_pick_message_always yes allow_anatomic_features yes info_output_mode choose !userguide_help yes fail_unattached_feature yes fail_ref_copy_when_missing_orig yes show_geom_checks_on_creation yes iconify_entire_pro yes shrinkage_value_display PERCENT_SHRINK lods_enabled yes ! ========== Baugruppen ================================================ inheritance_feature yes fix_refs_to_intersections yes allow_redo_intersections yes freeze_failed_assy_comp no shade_moving_comp yes comp_rollback_on_redef yes open_simplified_rep_by_default no default_ext_ref_scope all scope_invalid_refs prohibit package_constraints update ! ========== Gewinde ==================================================== allow_udf_style_cosm_threads no hole_diameter_override yes ! ========== Ebenen - Standardebenen zuweisen =========================== create_numbered_layers no ! ========== Standardebenen festlegen =================================== def_layer layer_curve Kurven def_layer layer_surface Flaechen def_layer layer_axis Achsen def_layer layer_datum Ebenen def_layer layer_point Punkte def_layer layer_csys Koord.Systeme !============= Speichern =============================================== trail_dir C:\Temp !============= Zeichnung =============================================== drawing_setup_file C:\Dokumente und Einstellungen\XXXXXXXX\pro\standard\config_zg.dtl !============= Editieren =============================================== pro_editor_command notepad drawing_file_editor PROTAB family_table_editor PROTAB relation_file_editor editor protable_in_background NO !============= Such - Pfade ============================================ ! für NWT-Verzeichnisse search_path C:\dokumente und einstellungen\dbexkens\eigene dateien\pro\standard ! ========== Mapkeys ==================================== mapkey , @MAPKEY_LABELFERTIG;#Done/Return mapkey ' @MAPKEY_LABELFERTIG;#Done-Return mapkey . @MAPKEY_LABELFERTIG;#Done; mapkey q1 @MAPKEY_LABELFERTIG;#done/return;#done/return;#done/return;\ mapkey(continued) #done/return; mapkey q2 @MAPKEY_LABELFERTIG;#return;#return;#return;#return; mapkey q3 @MAPKEY_LABELFERTIG;#Done-return;#Done-return;#Done-return;\ mapkey(continued) #Done-return; mapkey q4 @MAPKEY_LABELFERTIG;#Done sel;#Done sel;#Done sel;#done;#done;\ mapkey(continued) #done;#done; mapkey q5 @MAPKEY_LABELFERTIG;#quit refs;#quit del/sup; mapkey q6 @MAPKEY_LABELFERTIG;#done;#quit;#done;#quit;#confirm;#done/return;\ mapkey(continued) #done;#done; mapkey q7 @MAPKEY_LABELFERTIG;#done;#quit;#confirm;#done/return;#done;#done; mapkey q8 @MAPKEY_LABELAbbruch;~ Activate `orient` `CancelPB`; mapkey qq @MAPKEY_LABELSpuer - FERTIG;%q1;%q2;%q3;%q4;%q5;%q6;%q7;%q8; mapkey x @MAPKEY_LABELRegenerieren;#Regenerate;#Automatic; mapkey eb #Feature;#Create;#Datum;#Plane mapkey ac @MAPKEY_LABELKE Achse erzeugen;#Feature;#Create;#Datum;#Axis mapkey ku #Feature;#Create;#Datum;#Curve mapkey pu #Feature;#Create;#Datum;#Point mapkey ko #Feature;#Create;#Datum;#Coord Sys mapkey kbd @MAPKEY_LABELKabel DICK;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Thick Cables`;~ Activate `env_dlg` `OK_`; mapkey kbm @MAPKEY_LABELKabel MITTELLINIE;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Centerline`;~ Activate `env_dlg` `OK_`; mapkey le @MAPKEY_LABELLetztes KE löschen;%qq;#Feature;#delete;#Sel By Menu;\ mapkey(continued) #Last Feature;%qq mapkey wv @MAPKEY_LABELArbeitsverzeichnis wechseln;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_working_dir`; mapkey ex @MAPKEY_LABELBaugruppe explodieren;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_explode`; mapkey zz @MAPKEY_LABELBaugruppe Zusammenbau;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_unexplode`; mapkey fls %qq;#layer;#set items;#add items;#LOKAL;#done sel;#feature; mapkey fla @MAPKEY_LABELAlle Ebenen ausgeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeBlank`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fli %qq;#layer;#set display;#blank;#LOKAL;'done sel;#save status;%qq;\ mapkey(continued) %fsb;#view;#repaint;%qq mapkey fle @MAPKEY_LABELAlle Ebenen eingeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeShown`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fln @MAPKEY_LABELFolie LOKAL mit Standards beleg;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ PopupOver `min_layers` `ActionMenu`1 `AssyTree`;\ mapkey(continued) ~ Open `min_layers` `ActionMenu`;~ Close `min_layers` `ActionMenu`;\ mapkey(continued) ~ Activate `min_layers` `ActionMenuItemAdd`;#FEATURE;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `CS0`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `OBEN`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `RECHTS`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `VORNE`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#DONE SEL;#DONE/RETURN@LAYER OBJ;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `CloseBtn`; mapkey tp @MAPKEY_LABELRegenerieung erzwungen;%qq;#set up;#parameters;\ mapkey(continued) #designate;#parameters;#select all;#done sel;#done;#info;#regen info;\ mapkey(continued) #beginning;#quit; mapkey pz %qq;#set up;#parameters;#create;%qq mapkey $F1 @MAPKEY_LABELZoom +;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomIn.view`; mapkey $F2 @MAPKEY_LABELZoom -;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomOut.view`; mapkey $F3 @MAPKEY_LABELAnsicht einpassen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_refit`; mapkey $F4 @MAPKEY_LABELAnsicht Standard;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_default`; mapkey gg @MAPKEY_LABELAnsicht GUT;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `GUT`; mapkey vv @MAPKEY_LABELAnsicht VORNE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `VORNE`; mapkey rr @MAPKEY_LABELAnsicht RECHTS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RECHTS`; mapkey oo @MAPKEY_LABELAnsicht OBEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `OBEN`; mapkey hh @MAPKEY_LABELAnsicht HINTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `HINTEN`; mapkey ll @MAPKEY_LABELAnsicht LINKS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LINKS`; mapkey uu @MAPKEY_LABELAnsicht UNTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `UNTEN`; mapkey la #View;#Orientation;#Previous;#Done-Return; mapkey dy180 @MAPKEY_LABELUm Y-Achse 180 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;180;#Done/Accept;#Done-Return; mapkey dy90 @MAPKEY_LABELUm Y-Achse 90 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;90;#Done/Accept;#Done-Return; mapkey mh #Sketch;#Line;#Centerline;#Horizontal mapkey mv #Sketch;#Line;#Centerline;#Vertical mapkey lh #Sketch;#Line;#Horizontal mapkey lv #Sketch;#Line;#Vertical mapkey ds @MAPKEY_LABELDatei speichern;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelSave.file`;; mapkey db @MAPKEY_LABELPurge durchführen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Close `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_purge`;; mapkey bo @MAPKEY_LABELBohrung erzeugen linear;#FEATURE;#CREATE;#HOLE;#DONE;\ mapkey(continued) #DONE; mapkey rk %qq;#Feature;#Create;#Round;#Done;#Done;#Done;#One By One; mapkey rf %qq;#Feature;#Create;#Round;#Done;#Done;#surf-surf;#Done; mapkey fa %qq;#Feature;#Create;#Chamfer;#Edge; mapkey ae @MAPKEY_LABELAcsen, Ebenen, Koordsys, Punkte;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`0 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`1; mapkey ee @MAPKEY_LABELEbenen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`0; mapkey aa @MAPKEY_LABELAchsen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`1; mapkey pp @MAPKEY_LABELPUNKTE ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`0; mapkey kk @MAPKEY_LABELKoordsys ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`0; mapkey mm @MAPKEY_LABELModellbaum ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvModelTree.ddisp`1 ;\ mapkey(continued) ~ FocusOut `newtree` `AssyTree`; mapkey dd @MAPKEY_LABELDrehkreuz ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvSpinCntr.ddisp`1; mapkey ra %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey re %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey ma @MAPKEY_LABELMessen ABSTAND;#info;#measure;#distance; mapkey col @MAPKEY_LABELFarbeinstellung;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_appearances`; mapkey klotz @MAPKEY_LABELKlotz als Grundgeometrie;#FEATURE;#CREATE;\ mapkey(continued) #PROTRUSION;#DONE;#BOTH SIDES;#DONE;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `VORNE`;#OKAY;#TOP;#SEL BY MENU;#DATUM;\ mapkey(continued) #NAME;~ Select `sellist0` `Namelist`1 `OBEN`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `RECHTS`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `OBEN`;#DONE SEL;#RECTANGLE;\ mapkey(continued) @PAUSE_FOR_SCREEN_PICK;@PAUSE_FOR_SCREEN_PICK;#DONE;#DONE;;#DONE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`; mapkey startteil @MAPKEY_LABELStartteil inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.prt`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey startbaugruppe @MAPKEY_LABELStartbaugruppe inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Select `new` `Type`1 `Assembly`;~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.asm`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey , @MAPKEY_LABELFERTIG;#Done/Return mapkey ' @MAPKEY_LABELFERTIG;#Done-Return mapkey . @MAPKEY_LABELFERTIG;#Done; mapkey q1 @MAPKEY_LABELFERTIG;#done/return;#done/return;#done/return;\ mapkey(continued) #done/return; mapkey q2 @MAPKEY_LABELFERTIG;#return;#return;#return;#return; mapkey q3 @MAPKEY_LABELFERTIG;#Done-return;#Done-return;#Done-return;\ mapkey(continued) #Done-return; mapkey q4 @MAPKEY_LABELFERTIG;#Done sel;#Done sel;#Done sel;#done;#done;\ mapkey(continued) #done;#done; mapkey q5 @MAPKEY_LABELFERTIG;#quit refs;#quit del/sup; mapkey q6 @MAPKEY_LABELFERTIG;#done;#quit;#done;#quit;#confirm;#done/return;\ mapkey(continued) #done;#done; mapkey q7 @MAPKEY_LABELFERTIG;#done;#quit;#confirm;#done/return;#done;#done; mapkey q8 @MAPKEY_LABELAbbruch;~ Activate `orient` `CancelPB`; mapkey qq @MAPKEY_LABELSpuer - FERTIG;%q1;%q2;%q3;%q4;%q5;%q6;%q7;%q8; mapkey x @MAPKEY_LABELRegenerieren;#Regenerate;#Automatic; mapkey eb #Feature;#Create;#Datum;#Plane mapkey ac @MAPKEY_LABELKE Achse erzeugen;#Feature;#Create;#Datum;#Axis mapkey ku #Feature;#Create;#Datum;#Curve mapkey pu #Feature;#Create;#Datum;#Point mapkey ko #Feature;#Create;#Datum;#Coord Sys mapkey kbd @MAPKEY_LABELKabel DICK;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Thick Cables`;~ Activate `env_dlg` `OK_`; mapkey kbm @MAPKEY_LABELKabel MITTELLINIE;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Centerline`;~ Activate `env_dlg` `OK_`; mapkey le @MAPKEY_LABELLetztes KE löschen;%qq;#Feature;#delete;#Sel By Menu;\ mapkey(continued) #Last Feature;%qq mapkey wv @MAPKEY_LABELArbeitsverzeichnis wechseln;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_working_dir`; mapkey ex @MAPKEY_LABELBaugruppe explodieren;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_explode`; mapkey zz @MAPKEY_LABELBaugruppe Zusammenbau;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_unexplode`; mapkey fls %qq;#layer;#set items;#add items;#LOKAL;#done sel;#feature; mapkey fla @MAPKEY_LABELAlle Ebenen ausgeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeBlank`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fli %qq;#layer;#set display;#blank;#LOKAL;'done sel;#save status;%qq;\ mapkey(continued) %fsb;#view;#repaint;%qq mapkey fle @MAPKEY_LABELAlle Ebenen eingeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeShown`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fln @MAPKEY_LABELFolie LOKAL mit Standards beleg;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ PopupOver `min_layers` `ActionMenu`1 `AssyTree`;\ mapkey(continued) ~ Open `min_layers` `ActionMenu`;~ Close `min_layers` `ActionMenu`;\ mapkey(continued) ~ Activate `min_layers` `ActionMenuItemAdd`;#FEATURE;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `CS0`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `OBEN`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `RECHTS`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `VORNE`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#DONE SEL;#DONE/RETURN@LAYER OBJ;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `CloseBtn`; mapkey tp @MAPKEY_LABELRegenerieung erzwungen;%qq;#set up;#parameters;\ mapkey(continued) #designate;#parameters;#select all;#done sel;#done;#info;#regen info;\ mapkey(continued) #beginning;#quit; mapkey pz %qq;#set up;#parameters;#create;%qq mapkey $F1 @MAPKEY_LABELZoom +;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomIn.view`; mapkey $F2 @MAPKEY_LABELZoom -;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomOut.view`; mapkey $F3 @MAPKEY_LABELAnsicht einpassen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_refit`; mapkey $F4 @MAPKEY_LABELAnsicht Standard;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_default`; mapkey gg @MAPKEY_LABELAnsicht GUT;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `GUT`; mapkey vv @MAPKEY_LABELAnsicht VORNE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `VORNE`; mapkey rr @MAPKEY_LABELAnsicht RECHTS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RECHTS`; mapkey oo @MAPKEY_LABELAnsicht OBEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `OBEN`; mapkey hh @MAPKEY_LABELAnsicht HINTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `HINTEN`; mapkey ll @MAPKEY_LABELAnsicht LINKS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LINKS`; mapkey uu @MAPKEY_LABELAnsicht UNTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `UNTEN`; mapkey la #View;#Orientation;#Previous;#Done-Return; mapkey dy180 @MAPKEY_LABELUm Y-Achse 180 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;180;#Done/Accept;#Done-Return; mapkey dy90 @MAPKEY_LABELUm Y-Achse 90 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;90;#Done/Accept;#Done-Return; mapkey mh #Sketch;#Line;#Centerline;#Horizontal mapkey mv #Sketch;#Line;#Centerline;#Vertical mapkey lh #Sketch;#Line;#Horizontal mapkey lv #Sketch;#Line;#Vertical mapkey ds @MAPKEY_LABELDatei speichern;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelSave.file`;; mapkey db @MAPKEY_LABELPurge durchführen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Close `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_purge`;; mapkey bo @MAPKEY_LABELBohrung erzeugen linear;#FEATURE;#CREATE;#HOLE;#DONE;\ mapkey(continued) #DONE; mapkey rk %qq;#Feature;#Create;#Round;#Done;#Done;#Done;#One By One; mapkey rf %qq;#Feature;#Create;#Round;#Done;#Done;#surf-surf;#Done; mapkey fa %qq;#Feature;#Create;#Chamfer;#Edge; mapkey ae @MAPKEY_LABELAcsen, Ebenen, Koordsys, Punkte;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`0 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`1; mapkey ee @MAPKEY_LABELEbenen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`0; mapkey aa @MAPKEY_LABELAchsen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`1; mapkey pp @MAPKEY_LABELPUNKTE ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`0; mapkey kk @MAPKEY_LABELKoordsys ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`0; mapkey mm @MAPKEY_LABELModellbaum ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvModelTree.ddisp`1 ;\ mapkey(continued) ~ FocusOut `newtree` `AssyTree`; mapkey dd @MAPKEY_LABELDrehkreuz ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvSpinCntr.ddisp`1; mapkey ra %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey re %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey ma @MAPKEY_LABELMessen ABSTAND;#info;#measure;#distance; mapkey col @MAPKEY_LABELFarbeinstellung;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_appearances`; mapkey klotz @MAPKEY_LABELKlotz als Grundgeometrie;#FEATURE;#CREATE;\ mapkey(continued) #PROTRUSION;#DONE;#BOTH SIDES;#DONE;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `VORNE`;#OKAY;#TOP;#SEL BY MENU;#DATUM;\ mapkey(continued) #NAME;~ Select `sellist0` `Namelist`1 `OBEN`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `RECHTS`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `OBEN`;#DONE SEL;#RECTANGLE;\ mapkey(continued) @PAUSE_FOR_SCREEN_PICK;@PAUSE_FOR_SCREEN_PICK;#DONE;#DONE;;#DONE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`; mapkey startteil @MAPKEY_LABELStartteil inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.prt`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey startbaugruppe @MAPKEY_LABELStartbaugruppe inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Select `new` `Type`1 `Assembly`;~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.asm`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey tt @MAPKEY_LABELTexte (3D-Notizen) ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnv3DNotes.smt`0; pro_unit_sys mmns mapkey 4k @MAPKEY_LABEL4 Koordsysteme;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumCsys.datum`;#OFFSET;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#DONE;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `SPRITZPUNKT`;\ mapkey(continued) #TRANSLATE;#X AXIS;10;#Y AXIS;10;#Z AXIS;10;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS0`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS1`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS2`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#DONE SEL; mapkey , @MAPKEY_LABELFERTIG;#Done/Return mapkey ' @MAPKEY_LABELFERTIG;#Done-Return mapkey . @MAPKEY_LABELFERTIG;#Done; mapkey q1 @MAPKEY_LABELFERTIG;#done/return;#done/return;#done/return;\ mapkey(continued) #done/return; mapkey q2 @MAPKEY_LABELFERTIG;#return;#return;#return;#return; mapkey q3 @MAPKEY_LABELFERTIG;#Done-return;#Done-return;#Done-return;\ mapkey(continued) #Done-return; mapkey q4 @MAPKEY_LABELFERTIG;#Done sel;#Done sel;#Done sel;#done;#done;\ mapkey(continued) #done;#done; mapkey q5 @MAPKEY_LABELFERTIG;#quit refs;#quit del/sup; mapkey q6 @MAPKEY_LABELFERTIG;#done;#quit;#done;#quit;#confirm;#done/return;\ mapkey(continued) #done;#done; mapkey q7 @MAPKEY_LABELFERTIG;#done;#quit;#confirm;#done/return;#done;#done; mapkey q8 @MAPKEY_LABELAbbruch;~ Activate `orient` `CancelPB`; mapkey qq @MAPKEY_LABELSpuer - FERTIG;%q1;%q2;%q3;%q4;%q5;%q6;%q7;%q8; mapkey x @MAPKEY_LABELRegenerieren;#Regenerate;#Automatic; mapkey eb #Feature;#Create;#Datum;#Plane mapkey ac @MAPKEY_LABELKE Achse erzeugen;#Feature;#Create;#Datum;#Axis mapkey ku #Feature;#Create;#Datum;#Curve mapkey pu #Feature;#Create;#Datum;#Point mapkey ko #Feature;#Create;#Datum;#Coord Sys mapkey kbd @MAPKEY_LABELKabel DICK;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Thick Cables`;~ Activate `env_dlg` `OK_`; mapkey kbm @MAPKEY_LABELKabel MITTELLINIE;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Centerline`;~ Activate `env_dlg` `OK_`; mapkey le @MAPKEY_LABELLetztes KE löschen;%qq;#Feature;#delete;#Sel By Menu;\ mapkey(continued) #Last Feature;%qq mapkey wv @MAPKEY_LABELArbeitsverzeichnis wechseln;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_working_dir`; mapkey ex @MAPKEY_LABELBaugruppe explodieren;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_explode`; mapkey zz @MAPKEY_LABELBaugruppe Zusammenbau;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_unexplode`; mapkey fls %qq;#layer;#set items;#add items;#LOKAL;#done sel;#feature; mapkey fla @MAPKEY_LABELAlle Ebenen ausgeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeBlank`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fli %qq;#layer;#set display;#blank;#LOKAL;'done sel;#save status;%qq;\ mapkey(continued) %fsb;#view;#repaint;%qq mapkey fle @MAPKEY_LABELAlle Ebenen eingeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeShown`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fln @MAPKEY_LABELFolie LOKAL mit Standards beleg;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ PopupOver `min_layers` `ActionMenu`1 `AssyTree`;\ mapkey(continued) ~ Open `min_layers` `ActionMenu`;~ Close `min_layers` `ActionMenu`;\ mapkey(continued) ~ Activate `min_layers` `ActionMenuItemAdd`;#FEATURE;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `CS0`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `OBEN`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `RECHTS`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `VORNE`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#DONE SEL;#DONE/RETURN@LAYER OBJ;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `CloseBtn`; mapkey tp @MAPKEY_LABELRegenerieung erzwungen;%qq;#set up;#parameters;\ mapkey(continued) #designate;#parameters;#select all;#done sel;#done;#info;#regen info;\ mapkey(continued) #beginning;#quit; mapkey pz %qq;#set up;#parameters;#create;%qq mapkey $F1 @MAPKEY_LABELZoom +;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomIn.view`; mapkey $F2 @MAPKEY_LABELZoom -;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomOut.view`; mapkey $F3 @MAPKEY_LABELAnsicht einpassen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_refit`; mapkey $F4 @MAPKEY_LABELAnsicht Standard;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_default`; mapkey gg @MAPKEY_LABELAnsicht GUT;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `GUT`; mapkey vv @MAPKEY_LABELAnsicht VORNE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `VORNE`; mapkey rr @MAPKEY_LABELAnsicht RECHTS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RECHTS`; mapkey oo @MAPKEY_LABELAnsicht OBEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `OBEN`; mapkey hh @MAPKEY_LABELAnsicht HINTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `HINTEN`; mapkey ll @MAPKEY_LABELAnsicht LINKS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LINKS`; mapkey uu @MAPKEY_LABELAnsicht UNTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `UNTEN`; mapkey la #View;#Orientation;#Previous;#Done-Return; mapkey dy180 @MAPKEY_LABELUm Y-Achse 180 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;180;#Done/Accept;#Done-Return; mapkey dy90 @MAPKEY_LABELUm Y-Achse 90 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;90;#Done/Accept;#Done-Return; mapkey mh #Sketch;#Line;#Centerline;#Horizontal mapkey mv #Sketch;#Line;#Centerline;#Vertical mapkey lh #Sketch;#Line;#Horizontal mapkey lv #Sketch;#Line;#Vertical mapkey ds @MAPKEY_LABELDatei speichern;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelSave.file`;; mapkey db @MAPKEY_LABELPurge durchführen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Close `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_purge`;; mapkey bo @MAPKEY_LABELBohrung erzeugen linear;#FEATURE;#CREATE;#HOLE;#DONE;\ mapkey(continued) #DONE; mapkey rk %qq;#Feature;#Create;#Round;#Done;#Done;#Done;#One By One; mapkey rf %qq;#Feature;#Create;#Round;#Done;#Done;#surf-surf;#Done; mapkey fa %qq;#Feature;#Create;#Chamfer;#Edge; mapkey ae @MAPKEY_LABELAcsen, Ebenen, Koordsys, Punkte;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`0 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`1; mapkey ee @MAPKEY_LABELEbenen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`0; mapkey aa @MAPKEY_LABELAchsen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`1; mapkey pp @MAPKEY_LABELPUNKTE ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`0; mapkey kk @MAPKEY_LABELKoordsys ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`0; mapkey mm @MAPKEY_LABELModellbaum ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvModelTree.ddisp`1 ;\ mapkey(continued) ~ FocusOut `newtree` `AssyTree`; mapkey dd @MAPKEY_LABELDrehkreuz ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvSpinCntr.ddisp`1; mapkey ra %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey re %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey ma @MAPKEY_LABELMessen ABSTAND;#info;#measure;#distance; mapkey col @MAPKEY_LABELFarbeinstellung;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_appearances`; mapkey klotz @MAPKEY_LABELKlotz als Grundgeometrie;#FEATURE;#CREATE;\ mapkey(continued) #PROTRUSION;#DONE;#BOTH SIDES;#DONE;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `VORNE`;#OKAY;#TOP;#SEL BY MENU;#DATUM;\ mapkey(continued) #NAME;~ Select `sellist0` `Namelist`1 `OBEN`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `RECHTS`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `OBEN`;#DONE SEL;#RECTANGLE;\ mapkey(continued) @PAUSE_FOR_SCREEN_PICK;@PAUSE_FOR_SCREEN_PICK;#DONE;#DONE;;#DONE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`; mapkey startteil @MAPKEY_LABELStartteil inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.prt`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey startbaugruppe @MAPKEY_LABELStartbaugruppe inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Select `new` `Type`1 `Assembly`;~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.asm`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey tt @MAPKEY_LABELTexte (3D-Notizen) ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnv3DNotes.smt`0; mapkey 4k @MAPKEY_LABEL4 Koordsysteme;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumCsys.datum`;#OFFSET;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#DONE;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `SPRITZPUNKT`;\ mapkey(continued) #TRANSLATE;#X AXIS;10;#Y AXIS;10;#Z AXIS;10;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS0`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS1`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS2`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#DONE SEL; mapkey kz @MAPKEY_LABELKoerper ziehem Leitkurve auswae;#FEATURE;#CREATE;\ mapkey(continued) #PROTRUSION;#SWEEP;#DONE;#SELECT TRAJ; mapkey , @MAPKEY_LABELFERTIG;#Done/Return mapkey ' @MAPKEY_LABELFERTIG;#Done-Return mapkey . @MAPKEY_LABELFERTIG;#Done; mapkey q1 @MAPKEY_LABELFERTIG;#done/return;#done/return;#done/return;\ mapkey(continued) #done/return; mapkey q2 @MAPKEY_LABELFERTIG;#return;#return;#return;#return; mapkey q3 @MAPKEY_LABELFERTIG;#Done-return;#Done-return;#Done-return;\ mapkey(continued) #Done-return; mapkey q4 @MAPKEY_LABELFERTIG;#Done sel;#Done sel;#Done sel;#done;#done;\ mapkey(continued) #done;#done; mapkey q5 @MAPKEY_LABELFERTIG;#quit refs;#quit del/sup; mapkey q6 @MAPKEY_LABELFERTIG;#done;#quit;#done;#quit;#confirm;#done/return;\ mapkey(continued) #done;#done; mapkey q7 @MAPKEY_LABELFERTIG;#done;#quit;#confirm;#done/return;#done;#done; mapkey q8 @MAPKEY_LABELAbbruch;~ Activate `orient` `CancelPB`; mapkey qq @MAPKEY_LABELSpuer - FERTIG;%q1;%q2;%q3;%q4;%q5;%q6;%q7;%q8; mapkey x @MAPKEY_LABELRegenerieren;#Regenerate;#Automatic; mapkey eb #Feature;#Create;#Datum;#Plane mapkey ac @MAPKEY_LABELKE Achse erzeugen;#Feature;#Create;#Datum;#Axis mapkey ku #Feature;#Create;#Datum;#Curve mapkey pu #Feature;#Create;#Datum;#Point mapkey ko #Feature;#Create;#Datum;#Coord Sys mapkey kbd @MAPKEY_LABELKabel DICK;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Thick Cables`;~ Activate `env_dlg` `OK_`; mapkey kbm @MAPKEY_LABELKabel MITTELLINIE;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_env`;\ mapkey(continued) ~ Select `env_dlg` `CblDispType`1 `Centerline`;~ Activate `env_dlg` `OK_`; mapkey le @MAPKEY_LABELLetztes KE löschen;%qq;#Feature;#delete;#Sel By Menu;\ mapkey(continued) #Last Feature;%qq mapkey wv @MAPKEY_LABELArbeitsverzeichnis wechseln;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_working_dir`; mapkey ex @MAPKEY_LABELBaugruppe explodieren;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_explode`; mapkey zz @MAPKEY_LABELBaugruppe Zusammenbau;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_unexplode`; mapkey fls %qq;#layer;#set items;#add items;#LOKAL;#done sel;#feature; mapkey fla @MAPKEY_LABELAlle Ebenen ausgeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeBlank`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fli %qq;#layer;#set display;#blank;#LOKAL;'done sel;#save status;%qq;\ mapkey(continued) %fsb;#view;#repaint;%qq mapkey fle @MAPKEY_LABELAlle Ebenen eingeschaltet;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Activate `min_layers` `ButtonSelall`;~ Activate `min_layers` `MakeShown`;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `RepaintBtn`;\ mapkey(continued) ~ Activate `min_layers` `SaveStatusBtn`;~ Activate `min_layers` `CloseBtn`; mapkey fln @MAPKEY_LABELFolie LOKAL mit Standards beleg;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ Select `min_layers` `AssyTree`1 `node0:LOKAL`;\ mapkey(continued) ~ PopupOver `min_layers` `ActionMenu`1 `AssyTree`;\ mapkey(continued) ~ Open `min_layers` `ActionMenu`;~ Close `min_layers` `ActionMenu`;\ mapkey(continued) ~ Activate `min_layers` `ActionMenuItemAdd`;#FEATURE;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `CS0`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `OBEN`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#SEL BY MENU;#NAME;\ mapkey(continued) ~ Select `sellistmul0` `Namelist`1 `RECHTS`;~ Activate `sellistmul0` `Ok`;\ mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellistmul0` `Namelist`1 `VORNE`;\ mapkey(continued) ~ Activate `sellistmul0` `Ok`;#DONE SEL;#DONE/RETURN@LAYER OBJ;\ mapkey(continued) ~ FocusOut `min_layers` `AssyTree`;~ Activate `min_layers` `CloseBtn`; mapkey tp @MAPKEY_LABELRegenerieung erzwungen;%qq;#set up;#parameters;\ mapkey(continued) #designate;#parameters;#select all;#done sel;#done;#info;#regen info;\ mapkey(continued) #beginning;#quit; mapkey pz %qq;#set up;#parameters;#create;%qq mapkey $F1 @MAPKEY_LABELZoom +;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomIn.view`; mapkey $F2 @MAPKEY_LABELZoom -;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomOut.view`; mapkey $F3 @MAPKEY_LABELAnsicht einpassen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_refit`; mapkey $F4 @MAPKEY_LABELAnsicht Standard;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_default`; mapkey gg @MAPKEY_LABELAnsicht GUT;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `GUT`; mapkey vv @MAPKEY_LABELAnsicht VORNE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `VORNE`; mapkey rr @MAPKEY_LABELAnsicht RECHTS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RECHTS`; mapkey oo @MAPKEY_LABELAnsicht OBEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `OBEN`; mapkey hh @MAPKEY_LABELAnsicht HINTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `HINTEN`; mapkey ll @MAPKEY_LABELAnsicht LINKS;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LINKS`; mapkey uu @MAPKEY_LABELAnsicht UNTEN;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `UNTEN`; mapkey la ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_prev`; mapkey dy180 @MAPKEY_LABELUm Y-Achse 180 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;180;#Done/Accept;#Done-Return; mapkey dy90 @MAPKEY_LABELUm Y-Achse 90 Grad drehen;#View;#Orientation;\ mapkey(continued) #Angles;#Vert;90;#Done/Accept;#Done-Return; mapkey mh #Sketch;#Line;#Centerline;#Horizontal mapkey mv #Sketch;#Line;#Centerline;#Vertical mapkey lh #Sketch;#Line;#Horizontal mapkey lv #Sketch;#Line;#Vertical mapkey ds @MAPKEY_LABELDatei speichern;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelSave.file`;; mapkey db @MAPKEY_LABELPurge durchführen;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Close `main_dlg_cur` `File.cb_file_delete`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_purge`;; mapkey bo @MAPKEY_LABELBohrung erzeugen linear;#FEATURE;#CREATE;#HOLE;#DONE;\ mapkey(continued) #DONE; mapkey rk %qq;#Feature;#Create;#Round;#Done;#Done;#Done;#One By One; mapkey rf %qq;#Feature;#Create;#Round;#Done;#Done;#surf-surf;#Done; mapkey fa %qq;#Feature;#Create;#Chamfer;#Edge; mapkey ae @MAPKEY_LABELAcsen, Ebenen, Koordsys, Punkte;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`0 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`1 ;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`1; mapkey ee @MAPKEY_LABELEbenen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvDtmDisp.ddisp`0; mapkey aa @MAPKEY_LABELAchsen ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvAxisDisp.ddisp`1; mapkey pp @MAPKEY_LABELPUNKTE ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvPntsDisp.ddisp`0; mapkey kk @MAPKEY_LABELKoordsys ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvCsysDisp.ddisp`0; mapkey mm @MAPKEY_LABELModellbaum ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvModelTree.ddisp`1 ;\ mapkey(continued) ~ FocusOut `newtree` `AssyTree`; mapkey dd @MAPKEY_LABELDrehkreuz ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvSpinCntr.ddisp`1; mapkey ra %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey re %,;%,;#Sec Tools;#Sec Environ;#Grid;#Grid ON/OFF; mapkey ma @MAPKEY_LABELMessen ABSTAND;#info;#measure;#distance; mapkey col @MAPKEY_LABELFarbeinstellung;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdlsetup`;\ mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_appearances`; mapkey klotz @MAPKEY_LABELKlotz als Grundgeometrie;#FEATURE;#CREATE;\ mapkey(continued) #PROTRUSION;#DONE;#BOTH SIDES;#DONE;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `VORNE`;#OKAY;#TOP;#SEL BY MENU;#DATUM;\ mapkey(continued) #NAME;~ Select `sellist0` `Namelist`1 `OBEN`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `RECHTS`;#SEL BY MENU;#DATUM;#NAME;\ mapkey(continued) ~ Select `sellist0` `Namelist`1 `OBEN`;#DONE SEL;#RECTANGLE;\ mapkey(continued) @PAUSE_FOR_SCREEN_PICK;@PAUSE_FOR_SCREEN_PICK;#DONE;#DONE;;#DONE;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\ mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`; mapkey startteil @MAPKEY_LABELStartteil inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.prt`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey startbaugruppe @MAPKEY_LABELStartbaugruppe inkl. Umbenennen;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\ mapkey(continued) ~ Select `new` `Type`1 `Assembly`;~ Activate `new` `Copy_Button`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `standard.asm`;\ mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;~ FocusOut `newtree` `AssyTree`;\ mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\ mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_rename`; mapkey tt @MAPKEY_LABELTexte (3D-Notizen) ein/aus;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnv3DNotes.smt`0; mapkey 4k @MAPKEY_LABEL4 Koordsysteme;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumCsys.datum`;#OFFSET;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#DONE;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `SPRITZPUNKT`;\ mapkey(continued) #TRANSLATE;#X AXIS;10;#Y AXIS;10;#Z AXIS;10;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS0`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS1`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#SEL BY MENU;#SEL BY MENU;\ mapkey(continued) #K82_SPRITZRAHMEN_A.ASM;~ Select `sellist0` `Namelist`1 `ACS2`;#ROTATE;\ mapkey(continued) #X AXIS;;#Y AXIS;;#Z AXIS;;#DONE MOVE;\ mapkey(continued) ~ FocusOut `main_dlg_cur` `PHTLeft.AssyTree`;#DONE SEL; mapkey kz @MAPKEY_LABELKoerper ziehem Leitkurve auswae;#FEATURE;#CREATE;\ mapkey(continued) #PROTRUSION;#SWEEP;#DONE;#SELECT TRAJ; start_model_dir C:\Dokumente und Einstellungen\dbexkens\Eigene Dateien\pro\standard model_tree_start yes mdl_tree_cfg_file C:\Dokumente und Einstellungen\dbexkens\Eigene Dateien\pro\tree.cfg logical_objects yes