;======================================================================

; MicroStation starts counting pens at 1, so even though the HP 650c has
; pens 0 through 255, pen 0 is not used by MicroStation.
num_pens   = 255                ; Defines pens used - max value is 255
change_pen = both		; options are color, weight, level or both
model      = HPGL2		; plotter model
driver     = hpgl2              ; MDL driver to use
autocenter 			; Automatically center plot on page
end_plot   = eject 		; Performs page eject
rotate     = none		; enable/disable automatic rotation to maximize
			        ; plots: cw = rotate clockwise, ccw = rotate
			        ; counter-clockwise, none = disable
default_extension/auto_incExt = '000'  	; default extension for plotfiles
;
; To configure a default output file name comment out the default_extension
; line above and uncomment this line.  "lpt1" may be substituted with any
; desired filename - e.g. "$(MS_PLTFILES)plotfile.000"
;
;default_outFile/auto_overwrite = "lpt1"
;
; Substitute the name of a pentable file to be loaded when this driver is selected
;pentable=\dir\file.tbl

border/pen=1/filename/time	; leave this out for no border
; communication=(handshake=0,baud=9600,par=none,data=8,stop=1)


; The SIZE records defines the plotting area of page.  The .27 offset
; given is to allow room for the border record.
; Use the first set when using roll paper and the second set for cut paper.
; Only 5 SIZE records can be defined at one time

; ENGLISH SIZE records
;size=(8.5,11.0)/num=0/off=(0.27,0.27)/name=a
;size=(11.0,17.0)/num=0/off=(0.27,0.27)/name=b
;size=(17.0,22.0)/num=0/off=(0.27,0.27)/name=c
;size=(22.0,34.0)/num=0/off=(0.27,0.27)/name=d
;size=(44.0,34.0)/num=0/off=(0.27,0.27)/name=e
;resolution(IN)=(0.00098425197,0.00098425197)	; specifies both res and units

; ENGLISH SIZE records
; size=(6.28,9.5)/num=0/off=(0.27,0.27)/name=a		; cut sheet
; size=(9.0,14.0)/num=0/off=(0.27,0.27)/name=b		; cut sheet
; size=(14.0,20.0)/num=0/off=(0.27,0.27)/name=c	; cut sheet
; size=(20.0,31.0)/num=0/off=(0.27,0.27)/name=d	; cut sheet
; size=(42.00,32.0)/num=0/off=(0.27,0.27)/name=e	; cut sheet

; Metric size records
; size=(158,244)/num=0/off=(0,7)/name=a4
; size=(229.0,355.0)/num=0/off=(0,7)/name=a3
; size=(355.0,508)/num=0/off=(0,7)/name=a2
; size=(788,508)/num=0/off=(7,7)/name=a1
 size=(1189,841)/num=0/off=(7,7)/name=a0
;size=(1500,914)/num=0/off=(7,7)/name=a0+
; size=(1750,914)/num=0/off=(7,7)/name=a0++
; size=(1950,914)/num=0/off=(7,7)/name=a0+++
 resolution(MM)=(0.025,0.025)			; Metric resolution

pen(1)=(0-8)/rgb=(0,0,0) ;schwarz


; The pen_width record determines how far the pen moves when drawing
; thick lines (weights) or when used to fill elements.  Values are
; between 0 and 15 with 15 moving the greater distance.
pen_width(1)=3
pen_width(2)=3
pen_width(3)=3
pen_width(4)=3
pen_width(5)=3
pen_width(6)=3
pen_width(7)=3
pen_width(8)=3
pen_width(9)=3
pen_width(10)=3
pen_width(11)=3
pen_width(12)=3
pen_width(13)=3
pen_width(14)=3
pen_width(15)=3
pen_width(16)=3
pen_width(17)=3
pen_width(18)=3
pen_width(19)=3
pen_width(20)=3
pen_width(21)=3
pen_width(22)=3
pen_width(23)=3
pen_width(24)=3
pen_width(25)=3
pen_width(26)=3
pen_width(27)=3
pen_width(28)=3
pen_width(29)=3
pen_width(30)=3
pen_width(31)=3
pen_width(32)=3
pen_width(33)=3
pen_width(34)=3
pen_width(35)=3
pen_width(36)=3
pen_width(37)=3
pen_width(38)=3
pen_width(39)=3
pen_width(40)=3
pen_width(41)=3
pen_width(42)=3
pen_width(43)=3
pen_width(44)=3
pen_width(45)=3
pen_width(46)=3
pen_width(47)=3
pen_width(48)=3
pen_width(49)=3
pen_width(50)=3
pen_width(51)=3
pen_width(52)=3
pen_width(53)=3
pen_width(54)=3
pen_width(55)=3
pen_width(56)=3
pen_width(57)=3
pen_width(58)=3
pen_width(59)=3
pen_width(60)=3
pen_width(61)=3
pen_width(62)=3
pen_width(63)=3
pen_width(64)=3
pen_width(65)=3
pen_width(66)=3
pen_width(67)=3
pen_width(68)=3
pen_width(69)=3
pen_width(70)=3
pen_width(71)=3
pen_width(72)=3
pen_width(73)=3
pen_width(74)=3
pen_width(75)=3
pen_width(76)=3
pen_width(77)=3
pen_width(78)=3
pen_width(79)=3
pen_width(80)=3
pen_width(81)=3
pen_width(82)=3
pen_width(83)=3
pen_width(84)=3
pen_width(85)=3
pen_width(86)=3
pen_width(87)=3
pen_width(88)=3
pen_width(89)=3
pen_width(90)=3
pen_width(91)=3
pen_width(92)=3
pen_width(93)=3
pen_width(94)=3
pen_width(95)=3
pen_width(96)=3
pen_width(97)=3
pen_width(98)=3
pen_width(99)=3
pen_width(100)=3
pen_width(101)=3
pen_width(102)=3
pen_width(103)=3
pen_width(104)=3
pen_width(105)=3
pen_width(106)=3
pen_width(107)=3
pen_width(108)=3
pen_width(109)=3
pen_width(110)=3
pen_width(111)=3
pen_width(112)=3
pen_width(113)=3
pen_width(114)=3
pen_width(115)=3
pen_width(116)=3
pen_width(117)=3
pen_width(118)=3
pen_width(119)=3
pen_width(120)=3
pen_width(121)=3
pen_width(122)=3
pen_width(123)=3
pen_width(124)=3
pen_width(125)=3
pen_width(126)=3
pen_width(127)=3
pen_width(128)=3
pen_width(129)=3
pen_width(130)=3
pen_width(131)=3
pen_width(132)=3
pen_width(133)=3
pen_width(134)=3
pen_width(135)=3
pen_width(136)=3
pen_width(137)=3
pen_width(138)=3
pen_width(139)=3
pen_width(140)=3
pen_width(141)=3
pen_width(142)=3
pen_width(143)=3
pen_width(144)=3
pen_width(145)=3
pen_width(146)=3
pen_width(147)=3
pen_width(148)=3
pen_width(149)=3
pen_width(150)=3
pen_width(151)=3
pen_width(152)=3
pen_width(153)=3
pen_width(154)=3
pen_width(155)=3
pen_width(156)=3
pen_width(157)=3
pen_width(158)=3
pen_width(159)=3
pen_width(160)=3
pen_width(161)=3
pen_width(162)=3
pen_width(163)=3
pen_width(164)=3
pen_width(165)=3
pen_width(166)=3
pen_width(167)=3
pen_width(168)=3
pen_width(169)=3
pen_width(170)=3
pen_width(171)=3
pen_width(172)=3
pen_width(173)=3
pen_width(174)=3
pen_width(175)=3
pen_width(176)=3
pen_width(177)=3
pen_width(178)=3
pen_width(179)=3
pen_width(180)=3
pen_width(181)=3
pen_width(182)=3
pen_width(183)=3
pen_width(184)=3
pen_width(185)=3
pen_width(186)=3
pen_width(187)=3
pen_width(188)=3
pen_width(189)=3
pen_width(190)=3
pen_width(191)=3
pen_width(192)=3
pen_width(193)=3
pen_width(194)=3
pen_width(195)=3
pen_width(196)=3
pen_width(197)=3
pen_width(198)=3
pen_width(199)=3
pen_width(200)=3
pen_width(201)=3
pen_width(202)=3
pen_width(203)=3
pen_width(204)=3
pen_width(205)=3
pen_width(206)=3
pen_width(207)=3
pen_width(208)=3
pen_width(209)=3
pen_width(210)=3
pen_width(211)=3
pen_width(212)=3
pen_width(213)=3
pen_width(214)=3
pen_width(215)=3
pen_width(216)=3
pen_width(217)=3
pen_width(218)=3
pen_width(219)=3
pen_width(220)=3
pen_width(221)=3
pen_width(222)=3
pen_width(223)=3
pen_width(224)=3
pen_width(225)=3
pen_width(226)=3
pen_width(227)=3
pen_width(228)=3
pen_width(229)=3
pen_width(230)=3
pen_width(231)=3
pen_width(232)=3
pen_width(233)=3
pen_width(234)=3
pen_width(235)=3
pen_width(236)=3
pen_width(237)=3
pen_width(238)=3
pen_width(239)=3
pen_width(240)=3
pen_width(241)=3
pen_width(242)=3
pen_width(243)=3
pen_width(244)=3
pen_width(245)=3
pen_width(246)=3
pen_width(247)=3
pen_width(248)=3
pen_width(249)=3
pen_width(250)=3
pen_width(251)=3
pen_width(252)=3
pen_width(253)=3
pen_width(254)=3
pen_width(255)=3

;  The style records defines how the design file line codes (styles)
;  are to be plotted.  Values are in plotter units (resolutions).
;  Values determine pen down/up movements, where (14,42) for a dot
;  pattern leaves the pen down for 14 units and up for 42 units.  The
;  /nohardware switch causes software stroking with these values.

style(1) = (14,42)/nohardware		; style = dot
style(2) = (70,42)/nohardware		; style = med dash
style(3) = (168,56)/nohardware 		; style = long dash
style(4) = (112,42,28,42)/nohardware	; style = dot-dash
style(5) = (56,56)/nohardware		; style = short dash
style(6) = (84,28,28,28,28,28)/nohardware 	; style = dash-dot-dot
style(7) = (112,28,56,28)/nohardware		; style = long dash - short dash


; Units for weight stroke are multiples of .025 mm.  Weights may appear
; thicker than normal when plotter is set to "draft" mode.  Set plotter
; on "final" setting to see true weight thickness.

weight_strokes=(5,7,8,10,12,14,16,20,24,28,40,60,65,70,75,80,85,90,95,100,105,110,115,120,125,130,135,140,145,150,155,160,165)

; Stroke_tolerance determines tolerance for arcs and circles.  Value is
; between 0 and 10 with 10 being the greater tolerance.  Larger values
; also create larger plot files.
stroke_tolerance=4.5

; linecap, linejoin and miter_limit values may differ between plotters.
; Check your plotter manual for their definition.

linecap	    = 1			; 1=butt, 2=square, 3=triangle, 4=round
linejoin    = 2			; 1=mitered, 2=miter/bevel, 3=triangle,
				;   4=round, 5=beveled, 6=no join
miter_limit = 1.5		; larger values mean longer spikes

; Construction/active points are not plotted by default. Uncomment the
; next line if you want points plotted. Points are plotted 0.1 cm dia.
; point_size = .1

; software_raster allows for plotting of type 87/88 raster elements. Value
; for resolution can be as high as your plotter's resolution.  Lower values
; will produce grainier images.  Remove comment to plot raster image.
  software_raster/res=32

; Specify color to plot colored raster images
  software_raster/res=32/background=color

; largest_polygon is used only for element filling.  The value defines
; the point at which software filling takes over in place of hardware
; filling.  The value relates to number of vertices used to draw the
; element.
largest_polygon=2048

; The quality command can be set to a value between 0 and 100.  0 represents
; the lowest quality (Draft), 50 represents middle quality (Final) and 100 
; represents best quality (Enhanced).  If no quality value is specified then
; the front panel setting will be used for the plot.
;
; quality=100