# -*- coding: mbcs -*-
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Model-1'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Model-1'].sketches['__profile__'].rectangle(point1=(0.0, 0.0), 
    point2=(140.0, 60.0))
mdb.models['Model-1'].sketches['__profile__'].ConstructionLine(point1=(-10.0, 
    30.0), point2=(100.0, 30.0))
mdb.models['Model-1'].sketches['__profile__'].HorizontalConstraint(entity=
    mdb.models['Model-1'].sketches['__profile__'].geometry[6])
mdb.models['Model-1'].sketches['__profile__'].move(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[2], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[3], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[4], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[5], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[6]), vector=(-80.0, 
    0.0))
mdb.models['Model-1'].sketches['__profile__'].ConstructionLine(point1=(50.0, 
    65.0), point2=(50.0, 55.0))
mdb.models['Model-1'].sketches['__profile__'].VerticalConstraint(entity=
    mdb.models['Model-1'].sketches['__profile__'].geometry[7])
mdb.models['Model-1'].sketches['__profile__'].ConstructionLine(point1=(-70.0, 
    65.0), point2=(-70.0, 50.0))
mdb.models['Model-1'].sketches['__profile__'].VerticalConstraint(entity=
    mdb.models['Model-1'].sketches['__profile__'].geometry[8])
mdb.models['Model-1'].sketches['__profile__'].ConstructionLine(point1=(-85.0, 
    60.0), point2=(78.0503005981445, 60.0))
mdb.models['Model-1'].sketches['__profile__'].HorizontalConstraint(entity=
    mdb.models['Model-1'].sketches['__profile__'].geometry[9])
mdb.models['Model-1'].sketches['__profile__'].move(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[9], ), vector=(0.0, 
    -7.0))
mdb.models['Model-1'].sketches['__profile__'].ConstructionLine(point1=(-70.0, 
    30.0), point2=(-78.0, -70.0))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[8], ))
mdb.models['Model-1'].sketches['__profile__'].ConstructionLine(point1=(-10.0, 
    60.0), point2=(-10.0, 35.0))
mdb.models['Model-1'].sketches['__profile__'].VerticalConstraint(entity=
    mdb.models['Model-1'].sketches['__profile__'].geometry[11])
mdb.models['Model-1'].sketches['__profile__'].copyMirror(mirrorLine=
    mdb.models['Model-1'].sketches['__profile__'].geometry[11], objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[10], ))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[7], ))
mdb.models['Model-1'].sketches['__profile__'].Line(point1=(-72.4, 0.0), point2=
    (-68.160000000149, 53.0))
mdb.models['Model-1'].sketches['__profile__'].CoincidentConstraint(entity1=
    mdb.models['Model-1'].sketches['__profile__'].vertices[4], entity2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[5])
mdb.models['Model-1'].sketches['__profile__'].CoincidentConstraint(entity1=
    mdb.models['Model-1'].sketches['__profile__'].vertices[5], entity2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[9])
mdb.models['Model-1'].sketches['__profile__'].Line(point1=(-68.160000000149, 
    53.0), point2=(48.1600000018952, 53.0))
mdb.models['Model-1'].sketches['__profile__'].HorizontalConstraint(entity=
    mdb.models['Model-1'].sketches['__profile__'].geometry[14])
mdb.models['Model-1'].sketches['__profile__'].CoincidentConstraint(entity1=
    mdb.models['Model-1'].sketches['__profile__'].vertices[6], entity2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[9])
mdb.models['Model-1'].sketches['__profile__'].Line(point1=(48.1600000018952, 
    53.0), point2=(52.4, 0.0))
mdb.models['Model-1'].sketches['__profile__'].CoincidentConstraint(entity1=
    mdb.models['Model-1'].sketches['__profile__'].vertices[7], entity2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[5])
mdb.models['Model-1'].sketches['__profile__'].autoTrimCurve(curve1=
    mdb.models['Model-1'].sketches['__profile__'].geometry[5], point1=(
    -44.3546524047852, 0.0898447036743164))
mdb.models['Model-1'].sketches['__profile__'].autoTrimCurve(curve1=
    mdb.models['Model-1'].sketches['__profile__'].geometry[16], point1=(
    -4.89786529541016, -0.0404272079467773))
mdb.models['Model-1'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Model-1'].sketches['__profile__'].geometry[13], curve2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[17], nearPoint1=(
    -72.3734741210938, 2.00337624549866), nearPoint2=(-73.7072982788086, 
    0.14148736000061), radius=5.0)
mdb.models['Model-1'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Model-1'].sketches['__profile__'].geometry[15], curve2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[18], nearPoint1=(
    52.1935653686523, 1.87685394287109), nearPoint2=(54.2196807861328, 
    0.00631141662597656), radius=5.0)
mdb.models['Model-1'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Model-1'].sketches['__profile__'].geometry[13], curve2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[14], nearPoint1=(
    -68.5880737304688, 49.6258010864258), nearPoint2=(-62.7142562866211, 
    52.8656463623047), radius=10.0)
mdb.models['Model-1'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Model-1'].sketches['__profile__'].geometry[14], curve2=
    mdb.models['Model-1'].sketches['__profile__'].geometry[15], nearPoint1=(
    40.7315292358398, 53.5615158081055), nearPoint2=(48.5061264038086, 
    47.2010040283203), radius=10.0)
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[11], ))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[10], ))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[12], ))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[9], ))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[6], ))
mdb.models['Model-1'].ConstrainedSketch(name='U-140', objectToCopy=
    mdb.models['Model-1'].sketches['__profile__'])
mdb.models['Model-1'].Part(dimensionality=THREE_D, name='U-Profil', type=
    DEFORMABLE_BODY)
mdb.models['Model-1'].parts['U-Profil'].BaseSolidExtrude(depth=1735.0, sketch=
    mdb.models['Model-1'].sketches['__profile__'])
del mdb.models['Model-1'].sketches['__profile__']
mdb.models['Model-1'].parts['U-Profil'].checkGeometry()
# Save by Marco on Wed May 13 17:22:00 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Model-1'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Model-1'].sketches['__profile__'].rectangle(point1=(0.0, 0.0), 
    point2=(1735.0, 2980.0))
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    gridAngle=0.0, gridOrigin=(0.0, 0.0))
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    gridAngle=0.0, gridOrigin=(0.0, 0.0))
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    sheetAuto=OFF, sheetSize=4000.0)
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(gridAuto=
    OFF, gridSpacing=10.0)
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(3480.0, -370.0))
mdb.models['Model-1'].sketches['__profile__'].move(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[2], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[3], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[4], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[5]), vector=(2640.0, 
    -2050.0))
mdb.models['Model-1'].sketches['__profile__'].autoConstrain(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[2], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[3], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[4], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[5]))
mdb.models['Model-1'].sketches['__profile__'].autoDimension(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[2], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[3], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[4], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[5]))
mdb.models['Model-1'].sketches['__profile__'].dimensions[0].setValues(value=
    406.5)
# Save by Marco on Wed May 13 17:30:26 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Model-1'].ConstrainedSketch(name='Platte-L', objectToCopy=
    mdb.models['Model-1'].sketches['__profile__'])
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(2640.0, -2050.0))
mdb.models['Model-1'].sketches['__profile__'].CircleByCenterPerimeter(center=(
    2757.5, -1910.0), point1=(2780.5, -1910.0))
mdb.models['Model-1'].sketches['__profile__'].HorizontalDimension(textPoint=(
    2770.591796875, -1956.56311035156), value=11.5, vertex1=
    mdb.models['Model-1'].sketches['__profile__'].vertices[4], vertex2=
    mdb.models['Model-1'].sketches['__profile__'].vertices[5])
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].dimensions[2], ))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[6], ))
mdb.models['Model-1'].sketches['__profile__'].CircleByCenterPerimeter(center=(
    2757.5, -1910.0), point1=(2769.0, -1910.0))
mdb.models['Model-1'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[7], ), vector=(0.0, 
    300.0))
mdb.models['Model-1'].sketches['__profile__'].move(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[8], ), vector=(0.0, 
    300.0))
mdb.models['Model-1'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[7], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[8]), vector=(0.0, 
    300.0))
mdb.models['Model-1'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[7], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[8], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[9], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[10]), vector=(0.0, 
    1200.0))
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(2757.5, 190.0))
mdb.models['Model-1'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[12], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[14]), vector=(0.0, 
    300.0))
mdb.models['Model-1'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[16], ), vector=(
    -10.0, 300.0))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[17], ))
mdb.models['Model-1'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[16], ), vector=(0.0, 
    300.0))
mdb.models['Model-1'].sketches['__profile__'].delete(objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[14], ))
mdb.models['Model-1'].Part(dimensionality=THREE_D, name='Platte', type=
    DEFORMABLE_BODY)
mdb.models['Model-1'].parts['Platte'].BaseSolidExtrude(depth=27.0, sketch=
    mdb.models['Model-1'].sketches['__profile__'])
del mdb.models['Model-1'].sketches['__profile__']
mdb.models['Model-1'].parts.changeKey(fromName='Platte', toName='Platte-L')
mdb.models['Model-1'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(3182.04166666667, -553.333333333333))
mdb.models['Model-1'].sketches['__profile__'].retrieveSketch(sketch=
    mdb.models['Model-1'].sketches['Platte-L'])
del mdb.models['Model-1'].sketches['__profile__']
mdb.models['Model-1'].parts['Platte-L'].setValues(space=THREE_D, type=
    DEFORMABLE_BODY)
mdb.models['Model-1'].ConstrainedSketch(name='__edit__', objectToCopy=
    mdb.models['Model-1'].parts['Platte-L'].features['Solid extrude-1'].sketch)
mdb.models['Model-1'].parts['Platte-L'].projectReferencesOntoSketch(filter=
    COPLANAR_EDGES, sketch=mdb.models['Model-1'].sketches['__edit__'], 
    upToFeature=
    mdb.models['Model-1'].parts['Platte-L'].features['Solid extrude-1'])
mdb.models['Model-1'].ConstrainedSketch(name='Platte-L-1', objectToCopy=
    mdb.models['Model-1'].sketches['__edit__'])
del mdb.models['Model-1'].sketches['__edit__']
del mdb.models['Model-1'].sketches['Platte-L']
mdb.models['Model-1'].sketches.changeKey(fromName='Platte-L-1', toName=
    'Platte-L')
mdb.models['Model-1'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Model-1'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(3182.04166666667, -553.333333333333))
mdb.models['Model-1'].sketches['__profile__'].retrieveSketch(sketch=
    mdb.models['Model-1'].sketches['Platte-L'])
mdb.models['Model-1'].sketches['__profile__'].mirror(mirrorLine=
    mdb.models['Model-1'].sketches['__profile__'].geometry[6], objectList=(
    mdb.models['Model-1'].sketches['__profile__'].geometry[4], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[5], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[6], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[7], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[8], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[9], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[10], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[11], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[12], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[13], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[14], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[15], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[16], 
    mdb.models['Model-1'].sketches['__profile__'].geometry[17]))
mdb.models['Model-1'].Part(dimensionality=THREE_D, name='Part-3', type=
    DEFORMABLE_BODY)
mdb.models['Model-1'].parts['Part-3'].BaseSolidExtrude(depth=27.0, sketch=
    mdb.models['Model-1'].sketches['__profile__'])
del mdb.models['Model-1'].sketches['__profile__']
# Save by Marco on Wed May 13 17:53:06 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models.changeKey(fromName='Model-1', toName='Lagerbock')
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(0.0, 0.0), 
    point2=(260.0, 140.0))
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(10.0, 10.0), 
    point2=(250.0, 130.0))
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], nearPoint1=(
    0.0639877319335938, 132.30827331543), nearPoint2=(7.13074493408203, 
    139.994918823242), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], nearPoint1=(
    -0.257225036621094, 12.8448219299316), nearPoint2=(8.41561126708984, 
    0.674289703369141), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], nearPoint1=(
    240.976287841797, 0.0337333679199219), nearPoint2=(260.249267578125, 
    13.165096282959), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], nearPoint1=(
    259.606842041016, 115.653839111328), nearPoint2=(241.297485351563, 
    139.994918823242), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], nearPoint1=(
    9.05805206298828, 115.333572387695), nearPoint2=(22.5491409301758, 
    129.746063232422), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], nearPoint1=(
    214.957763671875, 130.066329956055), nearPoint2=(249.327911376953, 
    114.693023681641), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], nearPoint1=(
    249.327911376953, 42.3103446960449), nearPoint2=(237.121673583984, 
    10.2826042175293), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], nearPoint1=(
    40.5372543334961, 9.64204788208008), nearPoint2=(9.70047760009766, 
    31.4209098815918), radius=10.0)
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].parts.changeKey(fromName='Part-3', toName='Platte-R')
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(0.0, 0.0), 
    point2=(260.0, 140.0))
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(10.0, 10.0), 
    point2=(250.0, 130.0))
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], nearPoint1=(
    9.60368347167969, 113.463989257813), nearPoint2=(22.5594787597656, 
    130.121322631836), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], nearPoint1=(
    230.875198364258, 129.781387329102), nearPoint2=(249.967971801758, 
    116.863464355469), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], nearPoint1=(
    249.286056518555, 26.437931060791), nearPoint2=(235.648361206055, 
    10.8004417419434), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], nearPoint1=(
    39.2656478881836, 10.8004417419434), nearPoint2=(9.60368347167969, 
    28.1376686096191), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], nearPoint1=(
    0.0572967529296875, 125.362091064453), nearPoint2=(10.9674530029297, 
    139.979751586914), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], nearPoint1=(
    225.079177856445, 139.639801025391), nearPoint2=(260.196228027344, 
    129.441436767578), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], nearPoint1=(
    259.173400878906, 13.8599510192871), nearPoint2=(244.171920776367, 
    0.942020416259766), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], nearPoint1=(
    13.3540344238281, 0.942020416259766), nearPoint2=(-0.283645629882813, 
    12.1602210998535), radius=15.0)
mdb.models['Lagerbock'].ConstrainedSketch(name='Rohr-1-V', objectToCopy=
    mdb.models['Lagerbock'].sketches['__profile__'])
mdb.models['Lagerbock'].Part(dimensionality=THREE_D, name='Part-4', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Part-4'].BaseSolidExtrude(depth=2965.0, sketch=
    mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].parts.changeKey(fromName='Part-4', toName='Rohr-1-V')
# Save by Marco on Wed May 13 18:08:10 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].ConstrainedSketch(name='__edit__', objectToCopy=
    mdb.models['Lagerbock'].sketches['Rohr-1-V'])
mdb.models['Lagerbock'].sketches.changeKey(fromName='__edit__', toName=
    'Rohr-1-V')
mdb.models['Lagerbock'].sketches.changeKey(fromName='Rohr-1-V', toName=
    'Rohr 260x140')
mdb.models['Lagerbock'].sketches.changeKey(fromName='Rohr 260x140', toName=
    'Rohr 260x140x10')
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(0.0, 0.0), 
    point2=(200.0, 120.0))
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(12.0, 12.0), 
    point2=(288.0, 108.0))
mdb.models['Lagerbock'].sketches['__profile__'].HorizontalDimension(textPoint=(
    242.563049316406, 134.587371826172), value=188.0, vertex1=
    mdb.models['Lagerbock'].sketches['__profile__'].vertices[5], vertex2=
    mdb.models['Lagerbock'].sketches['__profile__'].vertices[6])
mdb.models['Lagerbock'].sketches['__profile__'].HorizontalDimension(textPoint=(
    59.2932510375977, -11.4796142578125), value=12.0, vertex1=
    mdb.models['Lagerbock'].sketches['__profile__'].vertices[0], vertex2=
    mdb.models['Lagerbock'].sketches['__profile__'].vertices[4])
mdb.models['Lagerbock'].sketches['__profile__'].dimensions[0].setValues(value=
    176)
mdb.models['Lagerbock'].sketches['__profile__'].delete(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].dimensions[1], ))
mdb.models['Lagerbock'].sketches['__profile__'].delete(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].dimensions[0], ))
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], nearPoint1=(
    23.4230117797852, 98.2209091186523), nearPoint2=(32.7673568725586, 
    108.439582824707), radius=12.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], nearPoint1=(
    181.674072265625, 108.139030456543), nearPoint2=(199.458465576172, 
    99.1225509643555), radius=12.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], nearPoint1=(
    199.157043457031, 29.9961929321289), nearPoint2=(189.511260986328, 
    12.5643310546875), radius=12.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], nearPoint1=(
    36.0830917358398, 12.5643310546875), nearPoint2=(24.3273086547852, 
    21.8813629150391), radius=12.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], nearPoint1=(
    12.2700805664063, 104.832984924316), nearPoint2=(27.6430435180664, 
    119.259346008301), radius=18.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], nearPoint1=(
    184.386932373047, 120.161003112793), nearPoint2=(211.817138671875, 
    106.636283874512), radius=18.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], nearPoint1=(
    211.214263916016, 24.2857513427734), nearPoint2=(194.334167480469, 
    1.14345550537109), radius=18.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], nearPoint1=(
    30.9587783813477, 1.14345550537109), nearPoint2=(11.6672286987305, 
    20.3786163330078), radius=18.0)
mdb.models['Lagerbock'].ConstrainedSketch(name='Rohr 200x120x12', objectToCopy=
    mdb.models['Lagerbock'].sketches['__profile__'])
mdb.models['Lagerbock'].sketches.changeKey(fromName='__profile__', toName=
    'Rohr 200x120x10')
del mdb.models['Lagerbock'].sketches['Rohr 200x120x10']
mdb.models['Lagerbock'].ConstrainedSketch(name='__edit__', objectToCopy=
    mdb.models['Lagerbock'].sketches['Rohr 200x120x12'])
mdb.models['Lagerbock'].sketches.changeKey(fromName='__edit__', toName=
    'Rohr 200x120x12')
mdb.models['Lagerbock'].ConstrainedSketch(name='__edit__', objectToCopy=
    mdb.models['Lagerbock'].sketches['Rohr 200x120x12'])
del mdb.models['Lagerbock'].sketches['__edit__']
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Lagerbock'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(112.0, 60.0))
mdb.models['Lagerbock'].sketches['__profile__'].retrieveSketch(sketch=
    mdb.models['Lagerbock'].sketches['Rohr 200x120x12'])
mdb.models['Lagerbock'].Part(dimensionality=THREE_D, name='Part-5', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Part-5'].BaseSolidExtrude(depth=177.5, sketch=
    mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].parts.changeKey(fromName='Part-5', toName='Rohr-2-H')
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Lagerbock'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(112.0, 60.0))
mdb.models['Lagerbock'].sketches['__profile__'].retrieveSketch(sketch=
    mdb.models['Lagerbock'].sketches['Rohr 200x120x12'])
mdb.models['Lagerbock'].Part(dimensionality=THREE_D, name='Part-6', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Part-6'].BaseSolidExtrude(depth=420.0, sketch=
    mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].parts.changeKey(fromName='Part-6', toName='Rohr-3-H')
mdb.models['Lagerbock'].ConstrainedSketch(name='__edit__', objectToCopy=
    mdb.models['Lagerbock'].sketches['Rohr 200x120x12'])
mdb.models['Lagerbock'].sketches['__edit__'].HorizontalDimension(textPoint=(
    21.4369277954102, -14.1266555786133), value=10.0, vertex1=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[44], vertex2=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[24])
mdb.models['Lagerbock'].sketches['__edit__'].HorizontalDimension(textPoint=(
    212.176712036133, -19.491455078125), value=10.0, vertex1=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[18], vertex2=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[38])
mdb.models['Lagerbock'].sketches['__edit__'].HorizontalDimension(textPoint=(
    158.37141418457, -30.4892959594727), value=200.0, vertex1=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[44], vertex2=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[38])
mdb.models['Lagerbock'].sketches['__edit__'].VerticalDimension(textPoint=(
    250.378463745117, 12.1608657836914), value=120.0, vertex1=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[33], vertex2=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[39])
mdb.models['Lagerbock'].sketches['__edit__'].VerticalDimension(textPoint=(
    166.980255126953, 7.60078811645508), value=10.0, vertex1=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[19], vertex2=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[39])
mdb.models['Lagerbock'].sketches['__edit__'].VerticalDimension(textPoint=(
    171.822738647461, 113.555587768555), value=10.0, vertex1=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[13], vertex2=
    mdb.models['Lagerbock'].sketches['__edit__'].vertices[33])
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[6].setValues(value=15)
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[9].setValues(value=15)
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[8].setValues(value=15)
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[7].setValues(value=15)
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[2].setValues(value=10)
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[5].setValues(value=10)
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[4].setValues(value=10)
mdb.models['Lagerbock'].sketches['__edit__'].dimensions[3].setValues(value=10)
mdb.models['Lagerbock'].ConstrainedSketch(name='Rohr200x120x10', objectToCopy=
    mdb.models['Lagerbock'].sketches['__edit__'])
mdb.models['Lagerbock'].sketches.changeKey(fromName='__edit__', toName=
    'Rohr 200x120x12')
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Lagerbock'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(122.999698684501, 51.9448852083214))
mdb.models['Lagerbock'].sketches['__profile__'].retrieveSketch(sketch=
    mdb.models['Lagerbock'].sketches['Rohr200x120x10'])
mdb.models['Lagerbock'].Part(dimensionality=THREE_D, name='Part-7', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Part-7'].BaseSolidExtrude(depth=3065.0, sketch=
    mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].parts.changeKey(fromName='Part-7', toName='Rohr 6 S')
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=200.0)
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(0.0, 0.0), 
    point2=(200.0, 300.0))
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(10.0, 10.0), 
    point2=(190.0, 290.0))
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], nearPoint1=(
    -1.17067718505859, 284.496917724609), nearPoint2=(19.9002456665039, 
    300.084442138672), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[3], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], nearPoint1=(
    179.631439208984, 301.439910888672), nearPoint2=(200.702362060547, 
    285.852355957031), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[4], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], nearPoint1=(
    200.022613525391, 23.5746917724609), nearPoint2=(179.631439208984, 
    1.20994567871094), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[5], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[2], nearPoint1=(
    19.2205276489258, 1.88764953613281), nearPoint2=(0.868446350097656, 
    17.4752044677734), radius=15.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], nearPoint1=(
    9.02494049072266, 268.909332275391), nearPoint2=(29.416145324707, 
    289.918670654297), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], nearPoint1=(
    169.435821533203, 290.596374511719), nearPoint2=(187.787933349609, 
    272.975677490234), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], nearPoint1=(
    187.787933349609, 52.7166595458984), nearPoint2=(163.318450927734, 
    13.4089050292969), radius=10.0)
mdb.models['Lagerbock'].sketches['__profile__'].FilletByRadius(curve1=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], curve2=
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], nearPoint1=(
    29.416145324707, 12.0534515380859), nearPoint2=(9.02494049072266, 
    45.939453125), radius=10.0)
mdb.models['Lagerbock'].ConstrainedSketch(name='Rohr 300x200x10', objectToCopy=
    mdb.models['Lagerbock'].sketches['__profile__'])
mdb.models['Lagerbock'].Part(dimensionality=THREE_D, name='Rohr-5-H', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Rohr-5-H'].BaseSolidExtrude(depth=1420.0, 
    sketch=mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
# Save by Marco on Wed May 13 18:40:06 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].parts['Platte-L'].queryAttributes()
mdb.models['Lagerbock'].parts['Platte-L'].checkGeometry()
# Save by Marco on Wed May 13 18:51:46 2009
# Save by Marco on Wed May 13 18:51:46 2009
# Save by Marco on Wed May 13 18:53:03 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.DatumCsysByDefault(CARTESIAN)
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Platte-L-1', 
    part=mdb.models['Lagerbock'].parts['Platte-L'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Platte-R-1', 
    part=mdb.models['Lagerbock'].parts['Platte-R'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr 6 S-1', 
    part=mdb.models['Lagerbock'].parts['Rohr 6 S'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-1-V-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-1-V'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-2-H-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-2-H'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-3-H-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-3-H'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-5-H-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-5-H'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-1', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.features['Datum csys-1'].suppress()
mdb.models['Lagerbock'].rootAssembly.regenerate()
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-1-V-2', 
    part=mdb.models['Lagerbock'].parts['Rohr-1-V'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-1-V-3', 
    part=mdb.models['Lagerbock'].parts['Rohr-1-V'])
del mdb.models['Lagerbock'].rootAssembly.features['Rohr-1-V-2']
del mdb.models['Lagerbock'].rootAssembly.features['Rohr-1-V-3']
mdb.models['Lagerbock'].rootAssembly.deleteFeatures(('Platte-R-1', 
    'Rohr 6 S-1', 'Rohr-1-V-1', 'Rohr-2-H-1', 'Rohr-3-H-1', 'Rohr-5-H-1', 
    'U-Profil-1'))
del mdb.models['Lagerbock'].rootAssembly.features['Platte-L-1']
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-1-V-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-1-V'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-5-H-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-5-H'])
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr-5-H-1', ), 
    vector=(50.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr-5-H-1', ), 
    vector=(1000.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.regenerate()
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    168.333333, 0.0, 1976.666667), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1050.0, 105.0, 946.666667), ))
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    187.5, 0.0, 2965.0), ), flip=ON, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    900.0, 185.0, 355.0), ))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
del mdb.models['Lagerbock'].rootAssembly.features['Face to Face-1']
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    187.5, 0.0, 2965.0), ), flip=ON, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    1065.0, 0.0, 355.0), ))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    168.333333, 0.0, 1976.666667), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1301.666667, 105.0, 2980.0), ))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1301.666667, 105.0, 2980.0), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    168.333333, 0.0, 1976.666667), ))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.ParallelFace(fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    168.333333, 0.0, 1976.666667), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1301.666667, 105.0, 2980.0), ))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.ParallelFace(fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    168.333333, 0.0, 1976.666667), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1301.666667, 105.0, 2980.0), ))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
del mdb.models['Lagerbock'].rootAssembly.features['Edge to Edge-1']
mdb.models['Lagerbock'].rootAssembly.ParallelFace(fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1050.0, 105.0, 946.666667), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    168.333333, 0.0, 1976.666667), ))
mdb.models['Lagerbock'].rootAssembly.ParallelFace(fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    126.570593, -114.308785, 2965.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1178.333333, 0.0, 946.666667), ))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.features['Rohr-5-H-1'].suppress()
mdb.models['Lagerbock'].rootAssembly.deleteFeatures(('Rohr-5-H-1', 
    'Parallel Face-1'))
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-5-H-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-5-H'])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    168.333333, 0.0, 1976.666667), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    200.0, 195.0, 946.666667), ))
mdb.models['Lagerbock'].rootAssembly.rotate(angle=90.0, axisDirection=(0.0, 
    190.0, 0.0), axisPoint=(200.0, -200.0, 0.0), instanceList=('Rohr-5-H-1', ))
# Save by Marco on Wed May 13 19:21:33 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.ParallelFace(fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    6.666667, 51.666667, 0.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1146.666667, -71.666667, -150.0), ))
del mdb.models['Lagerbock'].rootAssembly.features['Parallel Face-1']
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    1146.666667, -71.666667, -150.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    6.666667, 51.666667, 0.0), ))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    187.5, 0.0, 0.0), ), flip=ON, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    555.0, -15.0, -150.0), ))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    555.0, -15.0, -150.0), ), flip=OFF, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    187.5, 0.0, 0.0), ))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.CoincidentPoint(fixedPoint=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    187.5, 0.0, 0.0), ), MIDDLE), movablePoint=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    200.0, 0.0, 67.5), ), MIDDLE))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr-5-H-1', ), 
    vector=(-200.0, 80.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr-1-V-1', ), 
    vector=(-150.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.rotate(angle=270.0, axisDirection=(0.0, 
    -180.0, 0.0), axisPoint=(0.0, -10.0, 0.0), instanceList=('Rohr-5-H-1', ))
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    0.0, 0.0, 67.5), ), flip=OFF, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    -150.0, 15.0, 741.25), ))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    -150.0, 15.0, 741.25), ), flip=OFF, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    0.0, 0.0, 67.5), ))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    -150.0, 15.0, 741.25), ), flip=ON, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges.findAt((
    0.0, 0.0, 67.5), ))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Platte-L-1', 
    part=mdb.models['Lagerbock'].parts['Platte-L'])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].faces.findAt((
    2768.926351, -1809.252157, 0.0), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    -143.333333, 51.666667, 0.0), ))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    -143.333333, 51.666667, 0.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].faces.findAt((
    2768.926351, -1809.252157, 0.0), ))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    946.666667, -71.666667, -150.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].faces.findAt((
    2768.926351, -1809.252157, 0.0), ))
mdb.models['Lagerbock'].rootAssembly.deleteFeatures(('Platte-L-1', 
    'Face to Face-2', 'Face to Face-3', 'Face to Face-1'))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    18.333333, 0.0, 1976.666667), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    71.666667, 0.0, -946.666667), ))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    -150.0, 51.666667, 1976.666667), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    -610.0, -105.0, -803.333333), ))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    -143.333333, 51.666667, 0.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    796.666667, -105.0, -810.0), ))
# Save by Marco on Wed May 13 19:37:20 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-1-V-2', 
    part=mdb.models['Lagerbock'].parts['Rohr-1-V'])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    796.666667, -300.0, 71.666667), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces.findAt((
    168.333333, 0.0, 1976.666667), ))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    796.666667, -105.0, 0.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces.findAt((
    -1352.5, -303.429407, 1596.808785), ))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    -150.0, -105.0, 6.666667), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces.findAt((
    -1482.5, -351.666667, 988.333333), ))
# Save by Marco on Wed May 13 19:39:16 2009
# Save by Marco on Wed May 13 19:39:21 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr 6 S-1', 
    part=mdb.models['Lagerbock'].parts['Rohr 6 S'])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    18.333333, 0.0, 1976.666667), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces.findAt((
    210.0, 75.0, 2043.333333), ))
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges.findAt((
    110.0, 97.5, 2965.0), ), flip=OFF, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].edges.findAt((
    270.0, -57.5, 3065.0), ))
del mdb.models['Lagerbock'].rootAssembly.features['Edge to Edge-1']
mdb.models['Lagerbock'].rootAssembly.deleteFeatures(('Rohr 6 S-1', 
    'Face to Face-7'))
mdb.models['Lagerbock'].rootAssembly.deleteFeatures(('Rohr-1-V-2', 
    'Face to Face-6', 'Face to Face-5', 'Face to Face-4'))
del mdb.models['Lagerbock'].rootAssembly.features['Face to Face-3']
del mdb.models['Lagerbock'].rootAssembly.features['Face to Face-1']
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    796.666667, 105.0, 100.0), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    18.333333, 0.0, 1976.666667), ))
#* FeatureError: This constraint will create a dependency cycle.
#* Please reselect the entities to define the constraint.
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    18.333333, 0.0, 1976.666667), ), flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    796.666667, 105.0, 100.0), ))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces.findAt((
    -143.333333, 51.666667, 0.0), ), flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces.findAt((
    796.666667, -71.666667, -50.0), ))
# Save by Marco on Wed May 13 19:44:31 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].Part(name='Rohr-1-V-1', objectToCopy=
    mdb.models['Lagerbock'].parts['Rohr-1-V'])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=ON, name='Rohr-1-V-1-1'
    , part=mdb.models['Lagerbock'].parts['Rohr-1-V-1'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].translate(
    vector=(1296.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces[4], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[6])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces[2], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[16])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[0], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces[17])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=ON, name='Rohr 6 S-1', 
    part=mdb.models['Lagerbock'].parts['Rohr 6 S'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].translate(vector=(
    1280.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces[6], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces[4])
# Save by Marco on Thu May 14 00:08:22 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges[13], 
    flip=OFF, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].edges[19])
del mdb.models['Lagerbock'].rootAssembly.features['Edge to Edge-1']
mdb.models['Lagerbock'].parts['Rohr-1-V-1'].PartitionCellByPlanePointNormal(
    cells=
    mdb.models['Lagerbock'].parts['Rohr-1-V-1'].cells.getSequenceFromMask((
    '[#1 ]', ), ), normal=mdb.models['Lagerbock'].parts['Rohr-1-V-1'].edges[37]
    , point=mdb.models['Lagerbock'].parts['Rohr-1-V-1'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr-1-V-1'].edges[24], MIDDLE))
del mdb.models['Lagerbock'].parts['Rohr-1-V-1'].features['Partition cell-1']
mdb.models['Lagerbock'].parts['Rohr-1-V-1'].DatumPlaneByLinePoint(line=
    mdb.models['Lagerbock'].parts['Rohr-1-V-1'].edges[24], point=
    mdb.models['Lagerbock'].parts['Rohr-1-V-1'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr-1-V-1'].edges[37], MIDDLE))
del mdb.models['Lagerbock'].parts['Rohr-1-V-1'].features['Datum plane-1']
mdb.models['Lagerbock'].rootAssembly.regenerate()
# Save by Marco on Thu May 14 00:37:31 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-2-H-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-2-H'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-1'].translate(vector=(
    1558.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces[2], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-1'].faces[17])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces[17], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-1'].faces[2])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces[0], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-1'].faces[0])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-3-H-1', 
    part=mdb.models['Lagerbock'].parts['Rohr-3-H'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr-3-H-1'].translate(vector=(
    1558.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[2], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-3-H-1'].faces[16])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[16], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-3-H-1'].faces[2])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[0], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-3-H-1'].faces[0])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-1-V-2', 
    part=mdb.models['Lagerbock'].parts['Rohr-1-V'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].translate(vector=(
    1576.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-3-H-1'].faces[17], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces[6])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-3-H-1'].faces[0], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-3-H-1'].faces[2], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces[16])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-5-H-2', 
    part=mdb.models['Lagerbock'].parts['Rohr-5-H'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].translate(vector=(
    1570.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces[2], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[10])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces[16], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[2])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-2'].faces[0], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[16])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-1-V-3', 
    part=mdb.models['Lagerbock'].parts['Rohr-1-V'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].translate(vector=(
    1576.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[6])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[2], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[16])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[16], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr-2-H-2', 
    part=mdb.models['Lagerbock'].parts['Rohr-2-H'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-2'].translate(vector=(
    1558.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[2], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-2'].faces[17])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[16], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-2'].faces[6])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-2'].faces[0])
mdb.models['Lagerbock'].rootAssembly.deleteFeatures(('Rohr 6 S-1', 
    'Face to Face-7'))
# Save by Marco on Sat May 16 15:44:16 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-1', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-1'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-1'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[2], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-1'].faces[1])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-2-H-2'].faces[16], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-1'].faces[12])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-2', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[14], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].faces[0])
del mdb.models['Lagerbock'].rootAssembly.features['Face to Face-28']
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[2], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].faces[12])
del mdb.models['Lagerbock'].rootAssembly.features['Face to Face-29']
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-1'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].faces[12])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-1'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].faces[1])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-3', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-3'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-3'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-3'].faces[12])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-2'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-3'].faces[1])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-4', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-4'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-4'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-3'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-4'].faces[12])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-3'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-4'].faces[1])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-5', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-5'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-5'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-4'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-5'].faces[12])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-4'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-5'].faces[1])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-6', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-6'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-6'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-5'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-6'].faces[1])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-5'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-6'].faces[12])
# Save by Marco on Sat May 16 15:51:58 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-7', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-7'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-7'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-6'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-7'].faces[1])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-6'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-7'].faces[12])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-8', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-8'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-8'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-7'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-8'].faces[12])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-7'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-8'].faces[1])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-9', 
    part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-9'].translate(vector=(
    1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-9'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-8'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-9'].faces[1])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-8'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-9'].faces[12])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-10'
    , part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-10'].translate(vector=
    (1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-10'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=-300.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-9'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-10'].faces[1])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-9'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-10'].faces[12])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='U-Profil-11'
    , part=mdb.models['Lagerbock'].parts['U-Profil'])
mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].translate(vector=
    (1364.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[2])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-10'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[12])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[17], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[1])
# Save by Marco on Sat May 16 15:56:45 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Platte-L-1', 
    part=mdb.models['Lagerbock'].parts['Platte-L'])
mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].translate(vector=(
    0.0, 0.0, 1.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-3'].faces[2], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].faces[15])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].faces[1])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[13], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].faces[0])
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Platte-R-1', 
    part=mdb.models['Lagerbock'].parts['Platte-R'])
mdb.models['Lagerbock'].rootAssembly.instances['Platte-R-1'].translate(vector=(
    0.0, 0.0, 1.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-5'].faces[2], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-R-1'].faces[14])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-R-1'].faces[3])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[12], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-R-1'].faces[2])
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=4000.0)
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(0.0, 0.0), 
    point2=(878.0, 2980.0))
mdb.models['Lagerbock'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(289.0, 140.0))
mdb.models['Lagerbock'].sketches['__profile__'].CircleByCenterPerimeter(center=
    (289.0, 140.0), point1=(300.5, 140.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], ), vector=(
    300.0, 0.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7]), vector=(0.0, 
    300.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[7], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9]), vector=(0.0, 
    300.0))
mdb.models['Lagerbock'].sketches['__profile__'].delete(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[8], ))
mdb.models['Lagerbock'].sketches['__profile__'].delete(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[10], ))
mdb.models['Lagerbock'].sketches['__profile__'].delete(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[9], ))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[6], ), vector=(
    0.0, 300.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[12], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[13]), vector=(0.0, 
    300.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[15], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[16]), vector=(0.0, 
    300.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[17], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[18]), vector=(0.0, 
    300.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[19], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[20]), vector=(0.0, 
    300.0))
mdb.models['Lagerbock'].sketches['__profile__'].sketchOptions.setValues(
    gridOrigin=(289.0, 1940.0))
mdb.models['Lagerbock'].sketches['__profile__'].copyMove(objectList=(
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[17], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[18], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[19], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[20], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[21], 
    mdb.models['Lagerbock'].sketches['__profile__'].geometry[22]), vector=(0.0, 
    900.0))
mdb.models['Lagerbock'].Part(dimensionality=THREE_D, name='Part-10', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Part-10'].BaseSolidExtrude(depth=27.0, sketch=
    mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].parts.changeKey(fromName='Part-10', toName='Platte M')
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Platte M-1', 
    part=mdb.models['Lagerbock'].parts['Platte M'])
mdb.models['Lagerbock'].rootAssembly.instances['Platte M-1'].translate(vector=(
    1357.8, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte M-1'].faces[24], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-R-1'].faces[15])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-R-1'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte M-1'].faces[3])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=22.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-R-1'].faces[0], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte M-1'].faces[2])
# Save by Marco on Sat May 16 16:13:31 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumAxisByPrincipalAxis(
    principalAxis=ZAXIS)
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumAxisByPrincipalAxis(
    principalAxis=YAXIS)
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumAxisByPrincipalAxis(
    principalAxis=ZAXIS)
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumAxisByPrincipalAxis(
    principalAxis=XAXIS)
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByMidPoint(point1=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].vertices[3], point2=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].vertices[11])
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumAxisByTwoPoint(point1=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[39], MIDDLE), point2=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[26], MIDDLE))
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum axis-1']
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum axis-2']
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum axis-3']
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum axis-4']
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum pt-1']
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumAxisByTwoPoint(point1=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[45], MIDDLE), point2=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[33], MIDDLE))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[21], MIDDLE), vector=(0.0, 
    0.0, 18.343841))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPlaneByLinePoint(line=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[8], point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[9])
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[33], MIDDLE), vector=(0.0, 
    0.0, 18.343841))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[45], MIDDLE), vector=(0.0, 
    0.0, 18.343841))
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum plane-1']
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum pt-1']
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum axis-1']
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum axis-5']
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[21], MIDDLE), vector=(0.0, 
    0.0, 36.687682))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPlaneByThreePoints(point1=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[12], point2=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[11], point3=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[13])
mdb.models['Lagerbock'].parts['Rohr 6 S'].PartitionCellByDatumPlane(cells=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].cells.getSequenceFromMask((
    '[#1 ]', ), ), datumPlane=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[14])
mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Solid extrude-1'].suppress(
    )
mdb.models['Lagerbock'].parts['Rohr 6 S'].resumeLastSetFeatures()
mdb.models['Lagerbock'].parts['Rohr 6 S'].PartitionCellByPlaneThreePoints(
    cells=mdb.models['Lagerbock'].parts['Rohr 6 S'].cells.getSequenceFromMask((
    '[#2 ]', ), ), point1=mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[12], 
    point2=mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[11], point3=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[13])
#* Feature creation failed.
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#10 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#0 #1 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#800000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#8 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#400000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#2 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#200000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#800 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#200 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#8 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#400 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#20000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#1000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#10 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#20 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#100 ]', ), ))
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr 6 S-1', 
    part=mdb.models['Lagerbock'].parts['Rohr 6 S'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].translate(vector=(
    1292.00000006168, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces[6], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[8], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces[9])
mdb.models['Lagerbock'].rootAssembly.DatumPlaneByThreePoints(point1=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges[37], 
    MIDDLE), point2=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].edges[39], 
    MIDDLE), point3=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].edges[2], 
    MIDDLE))
mdb.models['Lagerbock'].rootAssembly.PartitionFaceByDatumPlane(datumPlane=
    mdb.models['Lagerbock'].rootAssembly.datums[182], faces=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces.getSequenceFromMask(
    ('[#200 ]', ), ))
mdb.models['Lagerbock'].rootAssembly.PartitionFaceByDatumPlane(datumPlane=
    mdb.models['Lagerbock'].rootAssembly.datums[182], faces=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces.getSequenceFromMask(
    ('[#1000 ]', ), ))
mdb.models['Lagerbock'].rootAssembly.DatumPlaneByThreePoints(point1=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].vertices[0], 
    point2=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].vertices[1], 
    point3=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].vertices[5])
mdb.models['Lagerbock'].rootAssembly.deleteFeatures(('Datum plane-1', 
    'Partition face-2', 'Partition face-1', 'Datum plane-2'))
del mdb.models['Lagerbock'].rootAssembly.features['Datum csys-1']
mdb.models['Lagerbock'].rootAssembly.DatumPlaneByThreePoints(point1=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].edges[37], 
    MIDDLE), point2=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].edges[9], 
    MIDDLE), point3=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].edges[33], 
    MIDDLE))
mdb.models['Lagerbock'].ConstrainedSketch(gridSpacing=324.36, name=
    '__profile__', sheetSize=12974.75, transform=
    mdb.models['Lagerbock'].rootAssembly.MakeSketchTransform(
    sketchPlane=mdb.models['Lagerbock'].rootAssembly.datums[186], 
    sketchPlaneSide=SIDE1, 
    sketchUpEdge=mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].edges[5], 
    sketchOrientation=RIGHT, origin=(846.525866, -540.0, 2965.0)))
mdb.models['Lagerbock'].rootAssembly.projectReferencesOntoSketch(filter=
    COPLANAR_EDGES, sketch=mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr 6 S-1', ), 
    vector=(-740.051732, 10.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.DatumPointByOffset(point=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges[19], 
    MIDDLE), vector=(-420.0, 0.0, 0.0))
del mdb.models['Lagerbock'].rootAssembly.features['Datum pt-1']
del mdb.models['Lagerbock'].rootAssembly.features['Face to Face-68']
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1-1'].faces[6], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces[9])
mdb.models['Lagerbock'].rootAssembly.DatumPointByOffset(point=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].edges[6], 
    MIDDLE), vector=(-420.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr 6 S-1', ), 
    vector=(-420.0, 0.0, 0.0))
# Save by Marco on Sat May 16 17:09:12 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=4000.0)
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(
    -1601.23315429688, 1246.34899902344), point2=(1400.0, -1100.0))
mdb.models['Lagerbock'].Part(dimensionality=TWO_D_PLANAR, name='Part-11', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Part-11'].BaseShell(sketch=
    mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
del mdb.models['Lagerbock'].parts['Part-11']
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr 6 S-2', 
    part=mdb.models['Lagerbock'].parts['Rohr 6 S'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-2'].translate(vector=(
    2369.6998786774, 0.0, 0.0))
del mdb.models['Lagerbock'].rootAssembly.features['Datum pt-1']
mdb.models['Lagerbock'].rootAssembly.CoincidentPoint(fixedPoint=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges[19], 
    MIDDLE), movablePoint=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].edges[6], 
    MIDDLE))
#* FeatureError: The constraint cannot be applied because it conflicts 
#* with existing position constraints.
mdb.models['Lagerbock'].rootAssembly.DatumPointByOffset(point=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges[19], 
    MIDDLE), vector=(-420.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr 6 S-1', ), 
    vector=(420.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr 6 S-1', ), 
    vector=(-420.0, 0.0, 0.0))
del mdb.models['Lagerbock'].rootAssembly.features['Datum pt-1']
mdb.models['Lagerbock'].rootAssembly.EdgeToEdge(fixedAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].edges[19], 
    flip=ON, movableAxis=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].edges[6])
del mdb.models['Lagerbock'].rootAssembly.features['Edge to Edge-1']
mdb.models['Lagerbock'].ConstrainedSketch(name='__profile__', sheetSize=4000.0)
mdb.models['Lagerbock'].sketches['__profile__'].rectangle(point1=(-1300.0, 
    600.0), point2=(800.0, -900.0))
mdb.models['Lagerbock'].Part(dimensionality=THREE_D, name='Part-11', type=
    DEFORMABLE_BODY)
mdb.models['Lagerbock'].parts['Part-11'].BaseSolidExtrude(depth=20.0, sketch=
    mdb.models['Lagerbock'].sketches['__profile__'])
del mdb.models['Lagerbock'].sketches['__profile__']
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Part-11-1', 
    part=mdb.models['Lagerbock'].parts['Part-11'])
mdb.models['Lagerbock'].rootAssembly.instances['Part-11-1'].translate(vector=(
    5232.88475122699, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['U-Profil-11'].faces[1], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Part-11-1'].faces[4])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Platte-L-1'].faces[14], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Part-11-1'].faces[2])
mdb.models['Lagerbock'].rootAssembly.InstanceFromBooleanCut(cuttingInstances=(
    mdb.models['Lagerbock'].rootAssembly.instances['Part-11-1'], ), 
    instanceToBeCut=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'], name='Part-1'
    , originalInstances=DELETE)
del mdb.models['Lagerbock'].parts['Part-11']
del mdb.models['Lagerbock'].parts['Part-1']
mdb.models['Lagerbock'].rootAssembly.suppressFeatures(featureNames=('Part-1-1', 
    ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[4], MIDDLE), vector=(0.0, 
    0.0, 2788.27))
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Datum pt-4']
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[13], vector=(0.0, 0.0, 
    2788.27))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].vertices[6], vector=(0.0, 0.0, 
    2788.27))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPointByOffset(point=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].vertices[7], vector=(0.0, 0.0, 
    2788.27))
mdb.models['Lagerbock'].parts['Rohr 6 S'].DatumPlaneByThreePoints(point1=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[35], point2=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[34], point3=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[33])
mdb.models['Lagerbock'].parts['Rohr 6 S'].PartitionFaceByDatumPlane(datumPlane=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[36], faces=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask((
    '[#3fffe ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#8000000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#800000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#2000000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#800 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#200 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#20000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#400000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#2000000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#2000000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#80000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#2 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#20000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#400 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#40 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#10 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#200 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#4 ]', ), ))
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Partition cell-1']
#* Regeneration Failed
mdb.models['Lagerbock'].parts['Rohr 6 S'].deleteFeatures(('Remove faces-1', 
    'Remove faces-2', 'Remove faces-3', 'Remove faces-4', 'Remove faces-5', 
    'Remove faces-6', 'Remove faces-7', 'Remove faces-8', 'Remove faces-9', 
    'Remove faces-10', 'Remove faces-11', 'Remove faces-12', 'Remove faces-13', 
    'Remove faces-14', 'Remove faces-15', 'Remove faces-16'))
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Partition face-1']
mdb.models['Lagerbock'].parts['Rohr 6 S'].deleteFeatures(('Remove faces-17', 
    'Remove faces-18', 'Remove faces-19', 'Remove faces-20', 'Remove faces-21', 
    'Remove faces-22', 'Remove faces-23', 'Remove faces-24', 'Remove faces-25', 
    'Remove faces-26', 'Remove faces-27', 'Remove faces-28', 'Remove faces-29', 
    'Remove faces-30', 'Remove faces-31', 'Remove faces-32', 
    'Remove faces-33'))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#10000 ]', ), ))
del mdb.models['Lagerbock'].parts['Rohr 6 S'].features['Remove faces-1']
mdb.models['Lagerbock'].parts['Rohr 6 S'].PartitionCellByDatumPlane(cells=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].cells.getSequenceFromMask((
    '[#1 ]', ), ), datumPlane=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[36])
mdb.models['Lagerbock'].parts['Rohr 6 S'].PartitionCellByDatumPlane(cells=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].cells.getSequenceFromMask((
    '[#1 ]', ), ), datumPlane=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[14])
#* Feature creation failed.
mdb.models['Lagerbock'].parts['Rohr 6 S'].PartitionCellByDatumPlane(cells=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].cells.getSequenceFromMask((
    '[#2 ]', ), ), datumPlane=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].datums[14])
mdb.models['Lagerbock'].parts['Rohr 6 S'].RepairSliver(face=(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces[37], ), point1=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[92], MIDDLE), point2=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].InterestingPoint(
    mdb.models['Lagerbock'].parts['Rohr 6 S'].edges[30], MIDDLE))
#* Remove sliver failed.
#* 
#* Some possible causes of failure:
#*  - The part has more than one cell.
#*  - Invalid entities result from the operation.
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#55540000 #3e1e1 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#80000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#0 #1 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#100 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#40000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#200000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#2 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#80000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#10000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#100 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#4000 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#200 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#20 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#200 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#800 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#800 ]', ), ))
mdb.models['Lagerbock'].parts['Rohr 6 S'].RemoveFaces(deleteCells=True, 
    faceList=
    mdb.models['Lagerbock'].parts['Rohr 6 S'].faces.getSequenceFromMask(mask=(
    '[#4 ]', ), ))
mdb.models['Lagerbock'].rootAssembly.regenerate()
del mdb.models['Lagerbock'].rootAssembly.features['Datum plane-1']
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-1'].faces[6], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-2'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-1'].faces[6], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-2'].faces[10])
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr 6 S-2', ), 
    vector=(-1580.047013, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.DatumPointByOffset(point=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-2'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-2'].edges[6], 
    MIDDLE), vector=(-420.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr 6 S-2', ), 
    vector=(-420.0, 0.0, 0.0))
# Save by Marco on Sat May 16 17:51:12 2009
from part import *
from material import *
from section import *
from assembly import *
from step import *
from interaction import *
from load import *
from mesh import *
from job import *
from sketch import *
from visualization import *
from connectorBehavior import *
mdb.models['Lagerbock'].rootAssembly.Instance(dependent=OFF, name='Rohr 6 S-1', 
    part=mdb.models['Lagerbock'].parts['Rohr 6 S'])
mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].translate(vector=(
    3044.62527502076, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].faces[6], 
    flip=OFF, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces[0])
mdb.models['Lagerbock'].rootAssembly.FaceToFace(clearance=0.0, fixedPlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-1-V-3'].faces[6], 
    flip=ON, movablePlane=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr 6 S-1'].faces[4])
mdb.models['Lagerbock'].rootAssembly.DatumPointByOffset(point=
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].InterestingPoint(
    mdb.models['Lagerbock'].rootAssembly.instances['Rohr-5-H-2'].edges[21], 
    MIDDLE), vector=(-420.0, 0.0, 0.0))
mdb.models['Lagerbock'].rootAssembly.translate(instanceList=('Rohr 6 S-1', ), 
    vector=(-2874.97241, 0.0, 0.0))
# Save by Marco on Sat May 16 17:55:26 2009
