*Heading
** Job name: Lager_test Model name: Model-1
** Generated by: Abaqus/CAE Version 6.8-1
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=Part-1
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Part-1-1, part=Part-1
*Node
      1,           0.,           5.,  -6.12303177e-16
*Nset, nset=Part-1-1-RefPt_, internal
1, 
*Surface, type=REVOLUTION, name=RigidSurface_, internal
START,          10.,           5.
 LINE,          30.,           5.
 LINE,          30.,          -5.
 LINE,          10.,          -5.
 LINE,          10.,           5.
*End Instance
**  
*Node
      1,           0.,          -5.,  -6.12303177e-16
*Node
      2,          30.,           0.,           0.
*Element, type=CONN3D2
1, Part-1-1.1, 1
*Connector Section, elset=_PickedSet10, behavior=ConnSect-1
Join, Revolute
"Part-1-1-Datum csys-1",
*Nset, nset=_PickedSet6, internal
 2,
*Nset, nset=Wire-1-Set-1
 1,
*Nset, nset=Wire-1-Set-1, instance=Part-1-1
 1,
*Elset, elset=Wire-1-Set-1
 1,
*Elset, elset=_PickedSet10, internal
 1,
*Nset, nset=_PickedSet11, internal
 1,
*Nset, nset=_PickedSet12, internal
 2,
*Nset, nset="_T-Part-1-1-Datum csys-1", internal
_PickedSet11, 
*Transform, nset="_T-Part-1-1-Datum csys-1"
          0.,           1.,           0.,           0.,           0.,           1.
*Orientation, name="Part-1-1-Datum csys-1"
          0.,           1.,           0.,           0.,           0.,           1.
1, 0.
** Constraint: Constraint-1
*Rigid Body, ref node=_PickedSet6, analytical surface=Part-1-1.RigidSurface_
*End Assembly
*Connector Behavior, name=ConnSect-1
*Connector Friction, predefined
0.,0.,0.,0.
*Friction
 0.005,
** 
** BOUNDARY CONDITIONS
** 
** Name: BC-1 Type: Displacement/Rotation
*Boundary
_PickedSet11, 1, 1
_PickedSet11, 2, 2
_PickedSet11, 3, 3
_PickedSet11, 4, 4
_PickedSet11, 5, 5
_PickedSet11, 6, 6
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1
*Static
1., 1., 1e-05, 1.
** 
** LOADS
** 
** Name: Load-1   Type: Concentrated force
*Cload, follower
_PickedSet12, 3, -1000.
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=0
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field, variable=PRESELECT
** 
** HISTORY OUTPUT: H-Output-1
** 
*Output, history, variable=PRESELECT
*End Step