$$*          Pro/CLfile  Version Wildfire 4.0 - M050
$$-> MFGNO / PLATTE_10MM
PARTNO / PLATTE_10MM
$$-> FEATNO / 29
MACHIN / UNCX01, 99
$$-> CUTCOM_GEOMETRY_TYPE / OUTPUT_ON_CENTER
UNITS / MM
LOADTL / 1
$$-> CUTTER / 10.000000
$$-> CSYS / 1.0000000000, 0.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 1.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 0.0000000000, 1.0000000000, 0.0000000000
SPINDL / RPM, 1500.000000,  CLW
RAPID 
GOTO / 57.0000000000, 13.5000000000, 2.0000000000
CYCLE / CSINK, DIAMET, 3.000000, TLANGL, 90.000000, MMPM, 50.000000, CLEAR,$
 2.000000
GOTO / 57.0000000000, 13.5000000000, 0.0000000000
GOTO / 18.0000000000, 13.5000000000, 0.0000000000
GOTO / 10.0000000000, 32.2500000000, 0.0000000000
GOTO / 12.0000000000, 51.0000000000, 0.0000000000
GOTO / 18.0000000000, 89.0000000000, 0.0000000000
GOTO / 10.0000000000, 108.0000000000, 0.0000000000
GOTO / 18.0000000000, 127.0000000000, 0.0000000000
GOTO / 57.0000000000, 127.0000000000, 0.0000000000
CYCLE / OFF
SPINDL / OFF
$$-> END / 
$$-> FEATNO / 31
LOADTL / 2
$$-> CUTTER / 4.200000
$$-> CSYS / 1.0000000000, 0.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 1.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 0.0000000000, 1.0000000000, 0.0000000000
SPINDL / RPM, 2300.000000,  CLW
RAPID 
GOTO / 18.0000000000, 127.0000000000, 2.0000000000
CYCLE / DEEP, DEPTH, 14.261807, STEP, 5.000000, MMPM, 100.000000, CLEAR,$
 2.000000
GOTO / 18.0000000000, 127.0000000000, 0.0000000000
GOTO / 18.0000000000, 89.0000000000, 0.0000000000
GOTO / 12.0000000000, 51.0000000000, 0.0000000000
GOTO / 18.0000000000, 13.5000000000, 0.0000000000
CYCLE / OFF
SPINDL / OFF
$$-> END / 
$$-> FEATNO / 33
LOADTL / 3
$$-> CUTTER / 5.500000
$$-> CSYS / 1.0000000000, 0.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 1.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 0.0000000000, 1.0000000000, 0.0000000000
SPINDL / RPM, 1800.000000,  CLW
RAPID 
GOTO / 57.0000000000, 13.5000000000, 2.0000000000
CYCLE / DEEP, DEPTH, 14.652367, STEP, 5.000000, MMPM, 100.000000, CLEAR,$
 2.000000
GOTO / 57.0000000000, 13.5000000000, 0.0000000000
GOTO / 10.0000000000, 32.2500000000, 0.0000000000
GOTO / 10.0000000000, 108.0000000000, 0.0000000000
GOTO / 57.0000000000, 127.0000000000, 0.0000000000
CYCLE / OFF
SPINDL / OFF
$$-> END / 
$$-> FEATNO / 35
LOADTL / 4
$$-> CUTTER / 14.060000
$$-> CSYS / 1.0000000000, 0.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 1.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 0.0000000000, 1.0000000000, 0.0000000000
SPINDL / RPM, 1000.000000,  CLW
RAPID 
GOTO / 57.0000000000, 13.5000000000, 2.0000000000
CYCLE / CSINK, DIAMET, 9.700000, TLANGL, 90.000000, MMPM, 50.000000, CLEAR,$
 2.000000
GOTO / 57.0000000000, 13.5000000000, 0.0000000000
GOTO / 10.0000000000, 32.2500000000, 0.0000000000
GOTO / 10.0000000000, 108.0000000000, 0.0000000000
GOTO / 57.0000000000, 127.0000000000, 0.0000000000
CYCLE / OFF
$$-> END / 
$$-> FEATNO / 37
$$-> CSYS / 1.0000000000, 0.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 1.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 0.0000000000, 1.0000000000, 0.0000000000
RAPID 
GOTO / 18.0000000000, 127.0000000000, 2.0000000000
CYCLE / CSINK, DIAMET, 5.500000, TLANGL, 90.000000, MMPM, 50.000000, CLEAR,$
 2.000000
GOTO / 18.0000000000, 127.0000000000, 0.0000000000
GOTO / 18.0000000000, 89.0000000000, 0.0000000000
GOTO / 12.0000000000, 51.0000000000, 0.0000000000
GOTO / 18.0000000000, 13.5000000000, 0.0000000000
CYCLE / OFF
SPINDL / OFF
$$-> END / 
$$-> FEATNO / 40
LOADTL / 5
$$-> CUTTER / 5.000000
$$-> CSYS / 1.0000000000, 0.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 1.0000000000, 0.0000000000, 0.0000000000,  $
            0.0000000000, 0.0000000000, 1.0000000000, 0.0000000000
SPINDL / RPM, 400.000000,  CLW
RAPID 
GOTO / 18.0000000000, 127.0000000000, 2.0000000000
CYCLE / TAP, DEPTH, 14.000000, MMPR, 0.800000, CLEAR, 2.000000
GOTO / 18.0000000000, 127.0000000000, 0.0000000000
GOTO / 18.0000000000, 89.0000000000, 0.0000000000
GOTO / 12.0000000000, 51.0000000000, 0.0000000000
GOTO / 18.0000000000, 13.5000000000, 0.0000000000
CYCLE / OFF
SPINDL / OFF
$$-> END / 
FINI