ANSYS Academic Teaching Introductory *------------------------------------------------------------------* | | | W E L C O M E T O T H E A N S Y S (R) P R O G R A M | | | *------------------------------------------------------------------* *************************************************************** * ANSYS Release 18.1 LEGAL NOTICES * *************************************************************** * * * Copyright 2017 SAS IP, Inc. All rights reserved. * * Unauthorized use, distribution or duplication is * * prohibited. * * * * Ansys is a registered trademark of ANSYS, Inc. or its * * subsidiaries in the United States or other countries. * * See the ANSYS, Inc. online documentation or the ANSYS, Inc. * * documentation CD or online help for the complete Legal * * Notice. * * * *************************************************************** * * * THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION * * INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY * * PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. * * The software products and documentation are furnished by * * ANSYS, Inc. or its subsidiaries under a software license * * agreement that contains provisions concerning * * non-disclosure, copying, length and nature of use, * * compliance with exporting laws, warranties, disclaimers, * * limitations of liability, and remedies, and other * * provisions. The software products and documentation may be * * used, disclosed, transferred, or copied only in accordance * * with the terms and conditions of that software license * * agreement. * * * * ANSYS, Inc. is a UL registered * * ISO 9001:2008 company. * * * *************************************************************** * * * This product is subject to U.S. laws governing export and * * re-export. * * * * For U.S. Government users, except as specifically granted * * by the ANSYS, Inc. software license agreement, the use, * * duplication, or disclosure by the United States Government * * is subject to restrictions stated in the ANSYS, Inc. * * software license agreement and FAR 12.212 (for non-DOD * * licenses). * * * *************************************************************** Release 18.1 Point Releases and Patches installed: ***** ANSYS COMMAND LINE ARGUMENTS ***** BATCH MODE REQUESTED (-b) = NOLIST INPUT FILE COPY MODE (-c) = COPY DISTRIBUTED MEMORY PARALLEL REQUESTED 2 PARALLEL PROCESSES REQUESTED WITH SINGLE THREAD PER PROCESS TOTAL OF 2 CORES REQUESTED DESIGNXPLORER REQUESTED MPI OPTION = INTELMPI INPUT FILE NAME = D:\ANSYS\ordner\_ProjectScratch\Scr917C\dummy.dat OUTPUT FILE NAME = D:\ANSYS\ordner\_ProjectScratch\Scr917C\solve.out START-UP FILE MODE = NOREAD STOP FILE MODE = NOREAD RELEASE= Release 18.1 BUILD= 18.1 UP20170403 VERSION=WINDOWS x64 CURRENT JOBNAME=file0 16:27:50 NOV 25, 2017 CP= 0.218 PARAMETER _DS_PROGRESS = 999.0000000 /INPUT FILE= ds.dat LINE= 0 *** NOTE *** CP = 0.452 TIME= 16:27:50 The /CONFIG,NOELDB command is not valid in a Distributed ANSYS solution. Command is ignored. *GET _WALLSTRT FROM ACTI ITEM=TIME WALL VALUE= 16.4638889 TITLE= heizwendel-transient--Elektrisch-station_re Analyse (A5) ACT Extensions: MechanicalDropTest, 2.0 f0fd899f-9d88-4f46-8cf1-36bf5c218d65, wbex SET PARAMETER DIMENSIONS ON _WB_PROJECTSCRATCH_DIR TYPE=STRI DIMENSIONS= 248 1 1 PARAMETER _WB_PROJECTSCRATCH_DIR(1) = D:\ANSYS\ordner\_ProjectScratch\Scr917C\ SET PARAMETER DIMENSIONS ON _WB_SOLVERFILES_DIR TYPE=STRI DIMENSIONS= 248 1 1 PARAMETER _WB_SOLVERFILES_DIR(1) = D:\ANSYS\ordner\heizwendel-transient_files\dp0\SYS\MECH\ SET PARAMETER DIMENSIONS ON _WB_USERFILES_DIR TYPE=STRI DIMENSIONS= 248 1 1 PARAMETER _WB_USERFILES_DIR(1) = D:\ANSYS\ordner\heizwendel-transient_files\user_files\ --- Data in consistent MKS units. See Solving Units in the help system for more MKS UNITS SPECIFIED FOR INTERNAL LENGTH (l) = METER (M) MASS (M) = KILOGRAM (KG) TIME (t) = SECOND (SEC) TEMPERATURE (T) = CELSIUS (C) TOFFSET = 273.0 CHARGE (Q) = COULOMB FORCE (f) = NEWTON (N) (KG-M/SEC2) HEAT = JOULE (N-M) PRESSURE = PASCAL (NEWTON/M**2) ENERGY (W) = JOULE (N-M) POWER (P) = WATT (N-M/SEC) CURRENT (i) = AMPERE (COULOMBS/SEC) CAPACITANCE (C) = FARAD INDUCTANCE (L) = HENRY MAGNETIC FLUX = WEBER RESISTANCE (R) = OHM ELECTRIC POTENTIAL = VOLT INPUT UNITS ARE ALSO SET TO MKS *** ANSYS - ENGINEERING ANALYSIS SYSTEM RELEASE Release 18.1 18.1 *** DISTRIBUTED ANSYS Academic Teaching Introductory 01055371 VERSION=WINDOWS x64 16:27:50 NOV 25, 2017 CP= 0.452 heizwendel-transient--Elektrisch-station_re Analyse (A5) ***** ANSYS ANALYSIS DEFINITION (PREP7) ***** *********** Nodes for the whole assembly *********** *********** Elements for Body 1 "Volumenk_rper" *********** *********** Elements for Body 2 "Volumenk_rper" *********** *********** Send User Defined Coordinate System(s) *********** *********** Set Reference Temperature *********** *********** Send Materials *********** *********** Send Named Selection as Element Component *********** *********** Create Voltage *********** *********** Create Voltage *********** ***** ROUTINE COMPLETED ***** CP = 0.718 --- Number of total nodes = 20684 --- Number of contact elements = 0 --- Number of spring elements = 0 --- Number of bearing elements = 0 --- Number of solid elements = 6864 --- Number of condensed parts = 0 --- Number of total elements = 6864 *GET _WALLBSOL FROM ACTI ITEM=TIME WALL VALUE= 16.4638889 **************************************************************************** ************************* SOLUTION ******************************** **************************************************************************** ***** ANSYS SOLUTION ROUTINE ***** PERFORM A STATIC ANALYSIS THIS WILL BE A NEW ANALYSIS CONTACT INFORMATION PRINTOUT LEVEL 1 DO NOT COMBINE ELEMENT MATRIX FILES (.emat) AFTER DISTRIBUTED PARALLEL SOLUTION DO NOT COMBINE ELEMENT SAVE DATA FILES (.esav) AFTER DISTRIBUTED PARALLEL SOLUTION **************************************************** ******************* SOLVE FOR LS 1 OF 1**************** SPECIFIED CONSTRAINT VOLT FOR PICKED NODES REAL=_LOADVARI31 IMAG= 0.00000000 ALL SELECT FOR ITEM=NODE COMPONENT= IN RANGE 1 TO 20684 STEP 1 20684 NODES (OF 20684 DEFINED) SELECTED BY NSEL COMMAND. SPECIFIED CONSTRAINT VOLT FOR PICKED NODES REAL=_LOADVARI34 IMAG= 0.00000000 ALL SELECT FOR ITEM=NODE COMPONENT= IN RANGE 1 TO 20684 STEP 1 20684 NODES (OF 20684 DEFINED) SELECTED BY NSEL COMMAND. PRINTOUT RESUMED BY /GOP USE 1 SUBSTEPS INITIALLY THIS LOAD STEP FOR ALL DEGREES OF FREEDOM FOR AUTOMATIC TIME STEPPING: USE 1 SUBSTEPS AS A MAXIMUM USE 1 SUBSTEPS AS A MINIMUM TIME= 50.000 ERASE THE CURRENT DATABASE OUTPUT CONTROL TABLE. WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF NONE FOR ALL APPLICABLE ENTITIES WRITE NSOL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL FOR ALL APPLICABLE ENTITIES WRITE RSOL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL FOR ALL APPLICABLE ENTITIES WRITE FFLU ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL FOR ALL APPLICABLE ENTITIES WRITE FGRA ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL FOR ALL APPLICABLE ENTITIES *GET ANSINTER_ FROM ACTI ITEM=INT VALUE= 0.00000000 *IF ANSINTER_ ( = 0.00000 ) NE 0 ( = 0.00000 ) THEN *ENDIF ***** ANSYS SOLVE COMMAND ***** *** WARNING *** CP = 0.749 TIME= 16:27:50 Element shape checking is currently inactive. Issue SHPP,ON or SHPP,WARN to reactivate, if desired. *** NOTE *** CP = 0.780 TIME= 16:27:50 The model data was checked and warning messages were found. Please review output or errors file ( D:\ANSYS\ordner\_ProjectScratch\Scr917C\file0.err ) for these warning messages. *** ANSYS - ENGINEERING ANALYSIS SYSTEM RELEASE Release 18.1 18.1 *** DISTRIBUTED ANSYS Academic Teaching Introductory 01055371 VERSION=WINDOWS x64 16:27:50 NOV 25, 2017 CP= 0.780 heizwendel-transient--Elektrisch-station_re Analyse (A5) S O L U T I O N O P T I O N S PROBLEM DIMENSIONALITY. . . . . . . . . . . . .3-D DEGREES OF FREEDOM. . . . . . TEMP VOLT ANALYSIS TYPE . . . . . . . . . . . . . . . . .STATIC (STEADY-STATE) OFFSET TEMPERATURE FROM ABSOLUTE ZERO . . . . . 273.15 NEWTON-RAPHSON OPTION . . . . . . . . . . . . .PROGRAM CHOSEN GLOBALLY ASSEMBLED MATRIX . . . . . . . . . . .SYMMETRIC *** NOTE *** CP = 0.780 TIME= 16:27:50 Property KXX of material 1 is defined over a temperature range from 26.85 to 726.85 which does not include the uniform temperature (22). Change either temperature range or the uniform temperature. Checking for this condition discontinues. *** NOTE *** CP = 0.811 TIME= 16:27:51 The Solution Control Option is only valid for single field structural, single field thermal, single field diffusion, coupled thermal-diffusion analyses and coupled-field analyses with structural degrees of freedom. The SOLCONTROL,ON command (if present) has been de-activated. *** NOTE *** CP = 0.811 TIME= 16:27:51 This nonlinear analysis defaults to using the full Newton-Raphson solution procedure. This can be modified using the NROPT command. *** NOTE *** CP = 0.811 TIME= 16:27:51 The conditions for direct assembly have been met. No .emat or .erot files will be produced. D I S T R I B U T E D D O M A I N D E C O M P O S E R ...Number of elements: 6864 ...Number of nodes: 20684 ...Decompose to 2 CPU domains ...Element load balance ratio = 1.000 L O A D S T E P O P T I O N S LOAD STEP NUMBER. . . . . . . . . . . . . . . . 1 TIME AT END OF THE LOAD STEP. . . . . . . . . . 50.000 NUMBER OF SUBSTEPS. . . . . . . . . . . . . . . 1 MAXIMUM NUMBER OF EQUILIBRIUM ITERATIONS. . . . 25 STEP CHANGE BOUNDARY CONDITIONS . . . . . . . . NO TERMINATE ANALYSIS IF NOT CONVERGED . . . . . .YES (EXIT) CONVERGENCE CONTROLS. . . . . . . . . . . . . .USE DEFAULTS PRINT OUTPUT CONTROLS . . . . . . . . . . . . .NO PRINTOUT DATABASE OUTPUT CONTROLS ITEM FREQUENCY COMPONENT ALL NONE NSOL ALL RSOL ALL FFLU ALL FGRA ALL *** WARNING *** CP = 1.638 TIME= 16:27:51 Material property KXX of material 2 of element 4590 is evaluated at a temperature of 22, which is below the supplied temperature range. Temperature range checking terminates. *** WARNING *** CP = 1.654 TIME= 16:27:51 Material property KXX of material 2 of element 4792 is evaluated at a temperature of 22, which is below the supplied temperature range. Temperature range checking terminates. **** CENTER OF MASS, MASS, AND MASS MOMENTS OF INERTIA **** CALCULATIONS ASSUME ELEMENT MASS AT ELEMENT CENTROID TOTAL MASS = 0.20157E-03 MOM. OF INERTIA MOM. OF INERTIA CENTER OF MASS ABOUT ORIGIN ABOUT CENTER OF MASS XC = -0.37687E-10 IXX = 0.3558E-07 IXX = 0.8878E-08 YC = 0.11504E-01 IYY = 0.2302E-09 IYY = 0.2100E-09 ZC = 0.31616E-03 IZZ = 0.3575E-07 IZZ = 0.9075E-08 IXY = -0.8374E-13 IXY = -0.8383E-13 IYZ = -0.7334E-09 IYZ = -0.2677E-12 IZX = 0.5395E-17 IZX = 0.2994E-17 *** MASS SUMMARY BY ELEMENT TYPE *** TYPE MASS 1 0.739858E-06 2 0.200831E-03 Range of element maximum matrix coefficients in global coordinates Maximum = 921952.56 at element 6769. Minimum = 5.005536002E-03 at element 791. *** WARNING *** CP = 2.168 TIME= 16:27:51 Coefficient ratio exceeds 1.0e8 - Check results. *** ELEMENT MATRIX FORMULATION TIMES TYPE NUMBER ENAME TOTAL CP AVE CP 1 228 SOLID226 0.000 0.000000 2 6636 SOLID226 1.061 0.000160 Time at end of element matrix formulation CP = 2.16841388. ALL CURRENT ANSYS DATA WRITTEN TO FILE NAME= file.rdb FOR POSSIBLE RESUME FROM THIS POINT HT FLOW CONVERGENCE VALUE= 0.1027E-08 CRITERION= 0.1000E-08 CURRENT CONVERGENCE VALUE= 458.0 CRITERION= 0.4580 DISTRIBUTED SPARSE MATRIX DIRECT SOLVER. Number of equations = 41342, Maximum wavefront = 136 Local memory allocated for solver = 105.980 MB Local memory required for in-core solution = 93.764 MB Local memory required for out-of-core solution = 35.697 MB Total memory allocated for solver = 220.545 MB Total memory required for in-core solution = 194.887 MB Total memory required for out-of-core solution = 72.176 MB *** NOTE *** CP = 2.652 TIME= 16:27:52 The Distributed Sparse Matrix Solver is currently running in the in-core memory mode. This memory mode uses the most amount of memory in order to avoid using the hard drive as much as possible, which most often results in the fastest solution time. This mode is recommended if enough physical memory is present to accommodate all of the solver data. Distributed sparse solver maximum pivot= 2.292647736E+15 at node 4336 VOLT. Distributed sparse solver minimum pivot= 3.755849798E-14 at node 11606 TEMP. Distributed sparse solver minimum pivot in absolute value= 3.755849798E-14 at node 11606 TEMP. *** ERROR *** CP = 3.947 TIME= 16:27:53 There is at least 1 small equation solver pivot term (e.g., at the TEMP degree of freedom of node 11606). Please check for an insufficiently constrained model. NUMBER OF WARNING MESSAGES ENCOUNTERED= 4 NUMBER OF ERROR MESSAGES ENCOUNTERED= 1 ***** PROBLEM TERMINATED BY INDICATED ERROR(S) OR BY END OF INPUT DATA ***** +--------- D I S T R I B U T E D A N S Y S S T A T I S T I C S ------------+ Release: Release 18.1 Build: 18.1 Update: UP20170403 Platform: WINDOWS x64 Date Run: 11/25/2017 Time: 16:27 Process ID: 6596 Operating System: Windows 7 (Build: 7600) Processor Model: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz Compiler: Intel(R) FORTRAN Compiler Version 15.0.7 (Build: 20160518) Intel(R) C/C++ Compiler Version 15.0.7 (Build: 20160518) Intel(R) Math Kernel Library Version 11.3.3 Product Build 20160413 Number of machines requested : 1 Total number of cores available : 4 Number of physical cores available : 2 Number of processes requested : 2 Number of threads per process requested : 1 Total number of cores requested : 2 (Distributed Memory Parallel) MPI Type: INTELMPI MPI Version: Intel(R) MPI Library 5.1.3 for Windows* OS GPU Acceleration: Not Requested Job Name: file0 Input File: dummy.dat Core Machine Name Working Directory ---------------------------------------------------- 0 DaVino-PC D:\ANSYS\ordner\_ProjectScratch\Scr917C 1 DaVino-PC D:\ANSYS\ordner\_ProjectScratch\Scr917C Latency time from master to core 1 = 0.906 microseconds Communication speed from master to core 1 = 2022.83 MB/sec Total CPU time for main thread : 3.5 seconds Total CPU time summed for all threads : 4.0 seconds Elapsed time spent pre-processing model (/PREP7) : 0.1 seconds Elapsed time spent solution - preprocessing : 0.1 seconds Elapsed time spent computing solution : 2.6 seconds Elapsed time spent solution - postprocessing : 0.0 seconds Elapsed time spent post-processing model (/POST1) : 0.0 seconds Equation solver used : Sparse (symmetric) Equation solver computational rate : 7944.9 Mflops Equation solver effective I/O rate : 6513.6 MB/sec Maximum total memory used : 305.0 MB Maximum total memory allocated : 3136.0 MB Total physical memory available : 4 GB +------ E N D D I S T R I B U T E D A N S Y S S T A T I S T I C S -------+ *---------------------------------------------------------------------------* | | | DISTRIBUTED ANSYS RUN COMPLETED | | | |---------------------------------------------------------------------------| | | | Ansys Release 18.1 Build 18.1 UP20170403 WINDOWS x64 | | | |---------------------------------------------------------------------------| | | | Database Requested(-db) 1024 MB Scratch Memory Requested 1024 MB | | Maximum Database Used 10 MB Maximum Scratch Memory Used 150 MB | | | |---------------------------------------------------------------------------| | | | CP Time (sec) = 4.009 Time = 16:27:53 | | Elapsed Time (sec) = 5.000 Date = 11/25/2017 | | | *---------------------------------------------------------------------------*