/COM,ANSYS RELEASE 2021 R1           BUILD 21.1      UP20201109       22:15:18

 *** WARNING ***                         CP =       4.938   TIME= 22:15:39
 Shape testing revealed that 288 of the 29160 new or modified elements   
 violate shape warning limits.  To review test results, please see the   
 output file or issue the CHECK command.                                 

 *** WARNING ***                         CP =      10.516   TIME= 22:15:44
 Shape testing revealed that 288 of the 29160 new or modified elements   
 violate shape warning limits.  To review test results, please see the   
 output file or issue the CHECK command.                                 

 *** WARNING ***                         CP =      11.281   TIME= 22:15:44
 After NUMMRG,NODE, node 38540 (and possibly others) is associated with  
 more than one solid model entity.  Future commands which depend on the  
 node to solid model connectivity (meshing, mesh clearing, solid         
 boundary condition transfer, etc.) may not operate properly.            
 NUMMRG,KP may correct this problem.    



--> Die Meldungen oberhalb von hier sind egal, da sie das Ergebnis zunächst nicht beeinflussen und nur Warnungen sind.
Doch die Meldungen unterhalb von hier...(ich habe nur die Meldungen für einen Knoten abgespeichert, es sind aber einige betroffen.)



                                 

 *** ERROR ***                           CP =      11.438   TIME= 22:15:45
 Brick element 1378 has an aspect ratio of 1.E+20, which exceeds the     
 error limit of 1000000.                                                 

 *** WARNING ***                         CP =      11.609   TIME= 22:15:50
 Brick element 1378 has a pair of opposite edges that are 115.2 degrees  
 away from being parallel.  This exceeds the warning limit of 100        
 degrees.                                                                

 *** WARNING ***                         CP =      11.672   TIME= 22:15:50
 Brick element 1378 has an angle between adjacent edges of 170.4         
 degrees, which exceeds the warning limit of 165 degrees.                

 *** WARNING ***                         CP =      11.734   TIME= 22:15:50
 Brick element 1378 has a face with a warping factor of 0.2083, which    
 exceeds the warning limit of 0.2.                                       

 *** ERROR ***     SUPPRESSED MESSAGE    CP =      11.781   TIME= 22:15:50
 Brick element 1378 has a zero or negative determinant of the Jacobian   
 matrix at one of its sampling locations.  Midside nodes, if any, may    
 be poorly positioned.                                                   

 *** ERROR ***     SUPPRESSED MESSAGE    CP =      11.781   TIME= 22:15:50
 Element 1378 is an improperly connected degenerate brick element.  The  
 database may be corrupted at this point.  To proceed, clear the         
 current mesh and create a new one or try to resume a saved database     
 with the RESUME command.