| |
| Gut zu wissen: Hilfreiche Tipps und Tricks aus der Praxis prägnant, und auf den Punkt gebracht für SolidEdge |
Autor
|
Thema: [English] Home license (890 mal gelesen)
|
cacciatorino Mitglied
Beiträge: 47 Registriert: 15.01.2008
|
erstellt am: 19. Mai. 2010 15:02 <-- editieren / zitieren --> Unities abgeben:
Deare Edgers, first of all, I want to apoligize to write in english. Now my question: I have asked to my reseller for a "home license" (I have two D&D node-locked licenses), so he went to ask to Siemens Italy. Siemens Italy answered that Siemens ISW (Europe) says that home licenses don't exist anymore for european customers, while they are still sthere for US-customers. I woluld like to ask if somebody here had the same experience with Siemens-Germany, or it is just a quick way to bounce me by Siemens-Italy. Regards. Eine Antwort auf diesen Beitrag verfassen (mit Zitat/Zitat des Beitrags) IP |
cacciatorino Mitglied
Beiträge: 47 Registriert: 15.01.2008 Solid Edge V18-V20 Win7-64 Solidworks 2010 Win7-64 Modeling V17 Win7-64 Salome 6.4 Code_Aster 11
|
erstellt am: 19. Mai. 2010 15:17 <-- editieren / zitieren --> Unities abgeben:
|
wolha Moderator CAD - Consultant
Beiträge: 5563 Registriert: 30.01.2002 Win 10 Pro Solid Edge 2023 CAMWorks Primus PDM FEMAP Dynamic Designer Teamcenter
|
erstellt am: 19. Mai. 2010 15:18 <-- editieren / zitieren --> Unities abgeben: Nur für cacciatorino
HI, as far as I know, the home license was canceled somewhen during the changes of SE modules (clssic, foundation and so on) a couple of years ago. From that time on, there was now home use product available. On the other hand, in certain countries there exists the possibility for private licenses. But they are different to the old home use licenses. Home use were for usage of a company license at home (on a diffferent pc and IMHO not only fopr private use) where the private license should be for private usage only (academic usage), and therefore get a digital signature which makes documents no longer available for official licenses.
But to clarify that in deep, there only Siemens can and should answer. And: this could be differently managed in different countires too. regards Wolfgang
Eine Antwort auf diesen Beitrag verfassen (mit Zitat/Zitat des Beitrags) IP |
cacciatorino Mitglied
Beiträge: 47 Registriert: 15.01.2008
|
erstellt am: 19. Mai. 2010 18:03 <-- editieren / zitieren --> Unities abgeben:
Hi Wolfgang, thank you for aswering. Actually I made the request to my VAR because I know that home licenses are still available for US and Canada customers. I asked for an explication on the official Siemens BBS forum, let's wait if they will answer (our subscripiton fee is higher than the one of the US customers). I will report here if it will be the case. Regards. Eine Antwort auf diesen Beitrag verfassen (mit Zitat/Zitat des Beitrags) IP |