============================================================
Information listing created by :  weim1131
Date                           :  18.05.2006 07:52:42
Current work part              :  U:\Metric_dwg.prt
Node name                      :  mro001125a34b22
============================================================

WARNING:
--------
The drawing part is not an assembly part which references a master modell
according to the master model approach.
It is highly recommended to support the master model approach in order to
create a drawing.
Not to support the master model concept may cause serious problems when
the drawing later has to be exported from this part!


WARNING: Could not apply format rule
for attribute "AAA_SHEET"

WARNING: Could not apply format rule
for attribute "AAA_SHEETS_TOTAL"
============================================================
Information listing created by :  weim1131
Date                           :  18.05.2006 08:21:30
Current work part              :  F:\Projekte\KU9236-KU9238 Bosch ChP Umbau\UG\Reiniging Spindeltuer\054.3.1149.0_drw.prt
Node name                      :  mro001125a34b22
============================================================

WARNING: Could not apply format rule
for attribute "AAA_SHEET"

WARNING: Could not apply format rule
for attribute "AAA_SHEETS_TOTAL"
============================================================
Information listing created by :  weim1131
Date                           :  18.05.2006 08:22:00
Current work part              :  F:\Projekte\KU9236-KU9238 Bosch ChP Umbau\UG\Reiniging Spindeltuer\054.3.1149.0_drw.prt
Node name                      :  mro001125a34b22
============================================================

WARNING: Could not apply format rule
for attribute "AAA_SHEET"

WARNING: Could not apply format rule
for attribute "AAA_SHEETS_TOTAL"
============================================================
Information listing created by :  weim1131
Date                           :  18.05.2006 08:22:06
Current work part              :  F:\Projekte\KU9236-KU9238 Bosch ChP Umbau\UG\Reiniging Spindeltuer\054.3.1149.0_drw.prt
Node name                      :  mro001125a34b22
============================================================
Information on object # 1
 
Owning part          F:\Projekte\KU9236-KU9238 Bosch ChP Umbau\UG\Reiniging Spindeltuer\054.3.1149.0_drw.prt
Layer                1
Type                 Line (Section Step Segment)
Color                5 (MAGENTA)
Font                 CENTER_LINE
Width                Thick
Modified Version     55    17 Mai 2006 10:49 (by user amaa1017)
Created Version      48    17 Mai 2006 09:40 (by user amaa1017)
 
Resides on drawing   SHT1
Information Units    Millimeters
Angle                =       0.000000000
Length               =      90.000000000
 
Start Point          XC =   53.948118169          X =   53.948118169      
                     YC =  277.748078216          Y =  277.748078216      
                     ZC =    0.000000000          Z =    0.000000000      
 
End Point            XC =  143.948118169          X =  143.948118169      
                     YC =  277.748078216          Y =  277.748078216      
                     ZC =    0.000000000          Z =    0.000000000      
Parent View           : TOP@40
 
Section Line Type :  Stepped Section Line
 
Section Line Display Type :  ISO
 
Section Line Status  :  NOT RETAINED
 
Associative Hinge Line :  NO
 
End points of the curve
Absolute Coordinates  X =     -15.000000000
                      Y =      60.928595651
                      Z =       0.000000000
 
Absolute Coordinates  X =      75.000000000
                      Y =      60.928595651
                      Z =       0.000000000
 
Hinge line vector     X =       1.000000000
                      Y =       0.000000000
                      Z =       0.000000000
 
Arrow vector          X =       0.000000000
                      Y =       1.000000000
                      Z =       0.000000000
 
Cut plane vector      X =       1.000000000
                      Y =       0.000000000
                      Z =       0.000000000
------------------------------------------------------------
Object Dependency Graph:
     Line - ID 64948
Used by:
     None
 
------------------------------------------------------------
 
 
************************************************************
 
Information on object # 2
 
Owning part          F:\Projekte\KU9236-KU9238 Bosch ChP Umbau\UG\Reiniging Spindeltuer\054.3.1149.0_drw.prt
Layer                1
Type                 Line (Section Arrow Segment)
Color                5 (MAGENTA)
Font                 SOLID
Width                Thick
Modified Version     55    17 Mai 2006 10:49 (by user amaa1017)
Created Version      48    17 Mai 2006 09:40 (by user amaa1017)
 
Resides on drawing   SHT1
Information Units    Millimeters
Angle                =      90.000000000
Length               =       8.000000000
 
Start Point          XC =  140.948118169          X =  140.948118169      
                     YC =  269.748078216          Y =  269.748078216      
                     ZC =    0.000000000          Z =    0.000000000      
 
End Point            XC =  140.948118169          X =  140.948118169      
                     YC =  277.748078216          Y =  277.748078216      
                     ZC =    0.000000000          Z =    0.000000000      
Parent View           : TOP@40
 
Section Line Type :  Stepped Section Line
 
Section Line Display Type :  ISO
 
Section Line Status  :  NOT RETAINED
 
Associative Hinge Line :  NO
 
End points of the curve
Absolute Coordinates  X =      72.000000000
                      Y =      52.928595651
                      Z =       0.000000000
 
Absolute Coordinates  X =      72.000000000
                      Y =      60.928595651
                      Z =       0.000000000
 
Hinge line vector     X =       1.000000000
                      Y =       0.000000000
                      Z =       0.000000000
 
Arrow vector          X =       0.000000000
                      Y =       1.000000000
                      Z =       0.000000000
 
Cut plane vector      X =       1.000000000
                      Y =       0.000000000
                      Z =       0.000000000
------------------------------------------------------------
Object Dependency Graph:
     Line - ID 66652
Used by:
     None
 
------------------------------------------------------------