;********************************************************************************************* ; Dateiname : MA_GEWINDEWERTE.lsp ; Autor : Stephan Wörz ; Erstellt : 17.06.2005 ; geändert : ;********************************************************************************************* ; Beschreibung: - Schreiben von Werten in die Tabellen des MA - Modul ; - ;********************************************************************************************* ; Änderungen ; ;********************************************************************************************* (print "--- Machining Advisor Gewindetabellenerweiterung wird geladen! ---") ;; Hier wird direkt mit ersetzen der Tabellen beim Customizing gearbeitet ;; ;;---- all customization of Dialogs belonging to Machining Advisor have to be ;;---- made within package ':cad-cam-link-customization' ;; (in-package :cad-cam-link-customization) ;; ;;---- To use the Integration Kit functionality, you have to use the ;; package 'oli' which contains all the functions of the Integration Kit ;;---- and stands for Open-Lisp-Interface ;; (use-package :oli) ;; ;;---- For more information about the table names or function names ;; mentioned below, please refer to the ;; list of table and function names. ;; ;;---- Now changing (i.e. replacing) contents of the tap-table of ;; Machining Advisor ;; Using the class name "TappedHoles" will cause Machining Advisor to use ;; this table for all Tapped Holes as long as there are no special tables ;; for individual tapped holes like "PartiallyThreadedThroughHoles" ;; Caveat: The names of the table has to be given in lowercase letters ! ;; The colums contain the following data : ;; 1. Column Name : Tap Units ;; Key : :tap_units ;; Type : string { "inch" | "metric" } ;; Unit : nil ;; 2. Column Name : Tap ;; Key : :tap ;; Type : string ;; Unit : nil ;; 3. Column Name : Drill Rad (the radius of the pilot hole) ;; Key : :drill_rad ;; Type : :length ;; Unit : :mm ;; 4. Column Name : Tap Rad (radius of the nominal diameter of the thread) ;; Key : :tap_rad ;; Type : :length ;; Unit : :mm ;; 5. Column Name : Thread Size (the pitch or thread lead of the thread) ;; Key : :thread_size ;; Type : :length ;; Unit : :mm ;; 6. Column Name : Chamfer Rad (the outer radius of the chamfer) ;; Key : :drill_rad ;; Type : :length ;; Unit : :mm ;; 7. Column Name : Standard Tap Clearance (approximately 6 times thread pitch) ;; Key : :std_tap_clearance ;; Type : :length ;; Unit : :mm ;; 8. Column Name : ;; Key : ;; Type : ;; Unit : nil ;; 9. Column Name : ;; Key : ;; Type : ;; Unit : :mm ;; ;; for further information about the "sd-change-logical-table-contents" please ;; refer to the documentation of the SolidDesigner Integration Kit ;; With SolidDesigner Version 09.00 you may paste the following command into ;; the command line of SolidDesigner : ;; (oli:sd-display-url (cad-cam-link-ui::find-documentation "../integration_kit/reference/tables.html#sd-change-logical-table-contents")) ;; The find-documentation command may not be available with releases after SolidDesigner 09.00 ;; once the Help for Machining Advisor is fully integrated into the normal SolidDesigner Help ;; ;; As you can see within the example, the units of the columns can be redefined and have to be ;; specified therefore, but you can override the units for every entry by specifying a LISP list ;; containing a value and a units keyword. ;; ;; A speciality of the tap-table is shown below as well. For compatibility ;; reasons with older versions of Machining Advisor, the tap table has to ;; be supplied twice with the same contents ;; table 1: "mach_adv_library-tappedholes-tap-table" ;; table 2: "mach_adv_library-tappedholes-thread_dia-table" ;; Up to SolidDesigner 09.0x the "tap" table was the only one needed ;; later versions need the "thread_dia" table, which will be displayed ;; when pushing the thread_dia button and the "tap" table behind the scenes ;; to be able to process tapped holes from Rev 09.0x and to work properly ;; with the key-values sent to SolidDesigner by the "thread_dia" table. ;; ;; (sd-change-logical-table-contents "mach_adv_library-tappedholes-tap-table" ; Einheit Gewindebezeichnung Bohrungsradius Nenn-Radius Steigung Fasenradius Gewindelänge :units ' (nil nil :mm :mm :mm :mm :mm nil :mm ) :contents ' ( ; Metrisches Regelgewinde ("metric" "M 1 x 0.5 Regel" 0.3465 0.5 0.5 0.5 1.5 1 0.0 ) ("metric" "M 1.2 x 0.25 Regel" 0.4465 0.6 0.25 0.6 1.5 1 0.0 ) ("metric" "M 1.6 x 0.35 Regel" 0.585 0.8 0.35 0.8 2.1 1 0.0 ) ("metric" "M 2 x 0.4 Regel" 0.7545 1.0 0.4 1.0 2.4 1 0.0 ) ("metric" "M 2.2 x 0.45 Regel" 0.824 1.1 0.45 1.1 2.7 1 0.0 ) ("metric" "M 2.5 x 0.45 Regel" 0.974 1.25 0.45 1.25 2.7 1 0.0 ) ("metric" "M 3 x 0.5 Regel" 1.1935 1.5 0.5 1.5 3.0 1 0.0 ) ("metric" "M 4 x 0.7 Regel" 1.5705 2.0 0.7 2.0 4.2 1 0.0 ) ("metric" "M 5 x 0.8 Regel" 2.0095 2.5 0.8 2.5 4.8 1 0.0 ) ("metric" "M 6 x 1 Regel" 2.3865 3.0 1.0 3.0 6.0 1 0.0 ) ("metric" "M 8 x 1.25 Regel" 3.233 4.0 1.25 4.0 7.5 1 0.0 ) ("metric" "M 10 x 1.5 Regel" 4.08 5.0 1.5 5.0 9.0 1 0.0 ) ("metric" "M 12 x 1.75 Regel" 4.9265 6.0 1.75 6.0 10.5 1 0.0 ) ("metric" "M 14 x 2 Regel" 5.773 7.0 2.0 7.0 12.0 1 0.0 ) ("metric" "M 16 x 2 Regel" 6.773 8.0 2.0 8.0 12.0 1 0.0 ) ("metric" "M 18 x 2.5 Regel" 7.4965 9.0 2.5 9.0 15.0 1 0.0 ) ("metric" "M 20 x 2.5 Regel" 8.4665 10.0 2.5 10.0 15.0 1 0.0 ) ("metric" "M 24 x 3 Regel" 10.1595 12.0 3.0 12.0 18.0 1 0.0 ) ("metric" "M 30 x 3.5 Regel" 12.853 15.0 3.5 15.0 21.0 1 0.0 ) ("metric" "M 36 x 4 Regel" 15.5465 18.0 4.0 18.0 24.0 1 0.0 ) ("metric" "M 42 x 4.5 Regel" 18.2395 21.0 4.5 21.0 27.0 1 0.0 ) ; Metrisches Feingewinde ("MF" "M 4 x 0.5 Feingew." 1.7295 2 0.5 2.00 3.0 1 0.0 ) ("MF" "M 5 x 0.5 Feingew." 2.2295 2.5 0.5 2.50 3.0 1 0.0 ) ("MF" "M 6 x 0.75 Feingew." 2.6 3.0 0.75 3.00 4.5 1 0.0 ) ("MF" "M 8 x 0.5 Feingew." 3.7295 4.0 0.5 4.00 3.0 1 0.0 ) ("MF" "M 8 x 0.75 Feingew." 3.6 4.0 0.75 4.00 4.5 1 0.0 ) ("MF" "M 8 x 1 Feingew." 3.5 4.0 1.0 4.00 6.0 1 0.0 ) ("MF" "M 10 x 0.5 Feingew." 4.7295 5.0 0.5 5.00 3.0 1 0.0 ) ("MF" "M 10 x 0.75 Feingew." 4.6 5.0 0.75 5.00 4.5 1 0.0 ) ("MF" "M 10 x 1.0 Feingew." 4.5 5.0 1.0 5.00 6.0 1 0.0 ) ("MF" "M 10 x 1.25 Feingew." 4.35 5.0 1.25 5.00 7.5 1 0.0 ) ("MF" "M 12 x 1.0 Feingew." 5.5 6.0 1.0 6.00 6.0 1 0.0 ) ("MF" "M 12 x 1.25 Feingew." 5.35 6.0 1.25 6.00 7.5 1 0.0 ) ("MF" "M 12 x 1.5 Feingew." 5.25 6.0 1.5 6.00 9.0 1 0.0 ) ("MF" "M 14 x 1.0 Feingew." 6.5 7.0 1.0 7.00 6.0 1 0.0 ) ("MF" "M 14 x 1.25 Feingew." 6.35 7.0 1.25 7.00 7.5 1 0.0 ) ("MF" "M 14 x 1.5 Feingew." 6.25 7.0 1.5 7.00 9.0 1 0.0 ) ("MF" "M 16 x 1.0 Feingew." 7.5 8.0 1.0 8.00 6.0 1 0.0 ) ("MF" "M 16 x 1.5 Feingew." 7.25 8.0 1.5 8.00 9.0 1 0.0 ) ("MF" "M 18 x 1.0 Feingew." 8.5 9.0 1.0 9.00 6.0 1 0.0 ) ("MF" "M 18 x 1.5 Feingew." 8.25 9.0 1.5 9.00 9.0 1 0.0 ) ("MF" "M 18 x 2.0 Feingew." 7.9175 9.0 2.0 9.00 12.0 1 0.0 ) ("MF" "M 20 x 1.0 Feingew." 9.5 10.0 1.0 10.00 6.0 1 0.0 ) ("MF" "M 20 x 1.5 Feingew." 9.25 10.0 1.5 10.00 9.0 1 0.0 ) ("MF" "M 20 x 2.0 Feingew." 8.9175 10.0 2.0 10.00 12.0 1 0.0 ) ("MF" "M 22 x 1 Feingew." 10.5 11.0 1.0 10.5 6.0 1 0.0 ) ("MF" "M 22 x 1.5 Feingew." 10.25 11.0 1.5 10.25 9.0 1 0.0 ) ("MF" "M 22 x 2.0 Feingew." 10.0 11.0 2.0 10.0 12.0 1 0.0 ) ("MF" "M 24 x 1 Feingew." 11.5 12.0 1.0 11.5 6.0 1 0.0 ) ("MF" "M 24 x 1.5 Feingew." 11.25 12.0 1.5 11.25 9.0 1 0.0 ) ("MF" "M 24 x 2.0 Feingew." 11.0 12.0 2.0 11.0 12.0 1 0.0 ) ("MF" "M 36 x 1.5 Feingew." 17.25 18.0 1.5 17.25 9.0 1 0.0 ) ("MF" "M 300 x 4 Feingew." 148.0 150.0 1.5 148.0 24.0 1 0.0 ) ; Zollgewinde ("inch" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.8640 8 1 0.0 ) ("inch" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 6.5785 8 1 0.0 ) ("inch" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.864 8 1 0.0 ) ("inch" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 6.5785 8 1 0.0 ) ; British Standard Feingewinde - British Standard Fine ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; British Standard Withwort Grobgewinde - British Standard Withworth Coarse ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Zylindrisches British Standard Gewinde - British Standard Pipe ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Unifiziertes Grobgewinde - Unified National Coarse ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Unifiziertes Feingewinde - Unified National Fine ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Kegeliges Gasrohrgewinde 1:16 - National Taper Pipe 1:16 ("NPT" "Rp 1/8 (28 Gang/Zoll)" 4.2830 4.864 0.0907 4.864 6.0000 1 0.0 ) ("NPT" "Rp 1/4 (19 Gang/Zoll)" 5.7225 6.5785 1.3370 6.5785 8.0000 1 0.0 ) ("NPT" "Rp 3/8 (19 Gang/Zoll)" 7.4750 8.3310 1.3370 8.3310 8.0000 1 0.0 ) ("NPT" "Rp 1/2 (14 Gang/Zoll)" 9.3155 10.4775 1.8140 10.4775 11.000 1 0.0 ) ("NPT" "Rp 3/4 (14 Gang/Zoll)" 12.0585 13.2205 1.8140 13.2205 11.000 1 0.0 ) ; Rohrgewinde DIN EN 10226 ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Rohrgewinde DIN ISO 228 ("G" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.4 8 1 0.0 ) ("G" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 5.9 8 1 0.0 ) ("G" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.4 8 1 0.0 ) ("G" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 5.9 8 1 0.0 ) ; Panzerrohrgewinde - PG Gewinde DIN 40430 ("PG" "PG7" 5.6500 6.3000 1.2700 6.3000 9.0000 1 0.0 ) ("PG" "PG9" 6.9500 7.7500 1.4100 7.7500 9.0000 1 0.0 ) ("PG" "PG11" 8.6500 9.3000 1.4100 9.3000 9.0000 1 0.0 ) ("PG" "PG13,5" 9.500 10.200 1.4100 10.200 9.0000 1 0.0 ) ("PG" "PG16" 11.00 11.250 1.2700 11.250 9.0000 1 0.0 ) ("PG" "PG21" 13.00 14.150 1.5900 14.150 10.000 1 0.0 ) ("PG" "PG29" 17.50 18.500 1.5900 18.500 10.000 1 0.0 ) ("PG" "PG36" 22.750 23.500 1.5900 23.500 10.000 1 0.0 ) ("PG" "PG42" 26.250 27.000 1.5900 27.000 10.000 1 0.0 ) ("PG" "PG48" 28.900 29.650 1.5900 29.650 10.000 1 0.0 ) ; Trapezgewinde DIN 103 ("Trapezoid" "Tr 9x2" 3.5000 4.4100 2.0000 4.4100 6.0000 1 0.0 ) ("Trapezoid" "Tr 10x2" 4.0000 4.9100 2.0000 4.9100 6.0000 1 0.0 ) ("Trapezoid" "Tr 11x3" 4.0000 5.3820 3.0000 5.3820 9.0000 1 0.0 ) ("Trapezoid" "Tr 12x3" 4.5000 5.8820 3.0000 5.8820 9.0000 1 0.0 ) ("Trapezoid" "Tr 14x3" 5.5000 6.8820 3.0000 6.8820 9.0000 1 0.0 ) ("Trapezoid" "Tr 16x4" 6.0000 7.8500 4.0000 7.8500 12.0000 1 0.0 ) ("Trapezoid" "Tr 18x4" 7.0000 8.8500 4.0000 8.8500 12.0000 1 0.0 ) ("Trapezoid" "Tr 20x4" 8.0000 9.8500 4.0000 9.8500 12.0000 1 0.0 ) ("Trapezoid" "Tr 22x5" 8.5000 10.8325 5.0000 10.8325 15.0000 1 0.0 ) ("Trapezoid" "Tr 24x5" 9.5000 11.8325 5.0000 11.8325 15.0000 1 0.0 ) ("Trapezoid" "Tr 26x5" 10.500 12.8325 5.0000 12.8325 15.0000 1 0.0 ) ("Trapezoid" "Tr 28x5" 11.500 13.8325 5.0000 13.8325 15.0000 1 0.0 ) ; Trapezgewinde DIN 380 ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Sägegewinde DIN 513 ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Rundgewinde ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Rundgewinde ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Edisongewinde ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ); end contents ); end sd-change-logical-table-contents (sd-change-logical-table-contents "mach_adv_library-tappedholes-thread_dia-table" ; Einheit Gewindebezeichnung Bohrungsradius Nenn-Radius Steigung Fasenradius Gewindelänge :units ' (nil nil :mm :mm :mm :mm :mm nil :mm ) :contents ' ( ; Metrisches Regelgewinde ("metric" "M 1 x 0.5 Regel" 0.3465 0.5 0.5 0.5 1.5 1 0.0 ) ("metric" "M 1.2 x 0.25 Regel" 0.4465 0.6 0.25 0.6 1.5 1 0.0 ) ("metric" "M 1.6 x 0.35 Regel" 0.585 0.8 0.35 0.8 2.1 1 0.0 ) ("metric" "M 2 x 0.4 Regel" 0.7545 1.0 0.4 1.0 2.4 1 0.0 ) ("metric" "M 2.2 x 0.45 Regel" 0.824 1.1 0.45 1.1 2.7 1 0.0 ) ("metric" "M 2.5 x 0.45 Regel" 0.974 1.25 0.45 1.25 2.7 1 0.0 ) ("metric" "M 3 x 0.5 Regel" 1.1935 1.5 0.5 1.5 3.0 1 0.0 ) ("metric" "M 4 x 0.7 Regel" 1.5705 2.0 0.7 2.0 4.2 1 0.0 ) ("metric" "M 5 x 0.8 Regel" 2.0095 2.5 0.8 2.5 4.8 1 0.0 ) ("metric" "M 6 x 1 Regel" 2.3865 3.0 1.0 3.0 6.0 1 0.0 ) ("metric" "M 8 x 1.25 Regel" 3.233 4.0 1.25 4.0 7.5 1 0.0 ) ("metric" "M 10 x 1.5 Regel" 4.08 5.0 1.5 5.0 9.0 1 0.0 ) ("metric" "M 12 x 1.75 Regel" 4.9265 6.0 1.75 6.0 10.5 1 0.0 ) ("metric" "M 14 x 2 Regel" 5.773 7.0 2.0 7.0 12.0 1 0.0 ) ("metric" "M 16 x 2 Regel" 6.773 8.0 2.0 8.0 12.0 1 0.0 ) ("metric" "M 18 x 2.5 Regel" 7.4965 9.0 2.5 9.0 15.0 1 0.0 ) ("metric" "M 20 x 2.5 Regel" 8.4665 10.0 2.5 10.0 15.0 1 0.0 ) ("metric" "M 24 x 3 Regel" 10.1595 12.0 3.0 12.0 18.0 1 0.0 ) ("metric" "M 30 x 3.5 Regel" 12.853 15.0 3.5 15.0 21.0 1 0.0 ) ("metric" "M 36 x 4 Regel" 15.5465 18.0 4.0 18.0 24.0 1 0.0 ) ("metric" "M 42 x 4.5 Regel" 18.2395 21.0 4.5 21.0 27.0 1 0.0 ) ; Metrisches Feingewinde ("MF" "M 4 x 0.5 Feingew." 1.7295 2 0.5 2.00 3.0 1 0.0 ) ("MF" "M 5 x 0.5 Feingew." 2.2295 2.5 0.5 2.50 3.0 1 0.0 ) ("MF" "M 6 x 0.75 Feingew." 2.6 3.0 0.75 3.00 4.5 1 0.0 ) ("MF" "M 8 x 0.5 Feingew." 3.7295 4.0 0.5 4.00 3.0 1 0.0 ) ("MF" "M 8 x 0.75 Feingew." 3.6 4.0 0.75 4.00 4.5 1 0.0 ) ("MF" "M 8 x 1 Feingew." 3.5 4.0 1.0 4.00 6.0 1 0.0 ) ("MF" "M 10 x 0.5 Feingew." 4.7295 5.0 0.5 5.00 3.0 1 0.0 ) ("MF" "M 10 x 0.75 Feingew." 4.6 5.0 0.75 5.00 4.5 1 0.0 ) ("MF" "M 10 x 1.0 Feingew." 4.5 5.0 1.0 5.00 6.0 1 0.0 ) ("MF" "M 10 x 1.25 Feingew." 4.35 5.0 1.25 5.00 7.5 1 0.0 ) ("MF" "M 12 x 1.0 Feingew." 5.5 6.0 1.0 6.00 6.0 1 0.0 ) ("MF" "M 12 x 1.25 Feingew." 5.35 6.0 1.25 6.00 7.5 1 0.0 ) ("MF" "M 12 x 1.5 Feingew." 5.25 6.0 1.5 6.00 9.0 1 0.0 ) ("MF" "M 14 x 1.0 Feingew." 6.5 7.0 1.0 7.00 6.0 1 0.0 ) ("MF" "M 14 x 1.25 Feingew." 6.35 7.0 1.25 7.00 7.5 1 0.0 ) ("MF" "M 14 x 1.5 Feingew." 6.25 7.0 1.5 7.00 9.0 1 0.0 ) ("MF" "M 16 x 1.0 Feingew." 7.5 8.0 1.0 8.00 6.0 1 0.0 ) ("MF" "M 16 x 1.5 Feingew." 7.25 8.0 1.5 8.00 9.0 1 0.0 ) ("MF" "M 18 x 1.0 Feingew." 8.5 9.0 1.0 9.00 6.0 1 0.0 ) ("MF" "M 18 x 1.5 Feingew." 8.25 9.0 1.5 9.00 9.0 1 0.0 ) ("MF" "M 18 x 2.0 Feingew." 7.9175 9.0 2.0 9.00 12.0 1 0.0 ) ("MF" "M 20 x 1.0 Feingew." 9.5 10.0 1.0 10.00 6.0 1 0.0 ) ("MF" "M 20 x 1.5 Feingew." 9.25 10.0 1.5 10.00 9.0 1 0.0 ) ("MF" "M 20 x 2.0 Feingew." 8.9175 10.0 2.0 10.00 12.0 1 0.0 ) ("MF" "M 22 x 1 Feingew." 10.5 11.0 1.0 10.5 6.0 1 0.0 ) ("MF" "M 22 x 1.5 Feingew." 10.25 11.0 1.5 10.25 9.0 1 0.0 ) ("MF" "M 22 x 2.0 Feingew." 10.0 11.0 2.0 10.0 12.0 1 0.0 ) ("MF" "M 24 x 1 Feingew." 11.5 12.0 1.0 11.5 6.0 1 0.0 ) ("MF" "M 24 x 1.5 Feingew." 11.25 12.0 1.5 11.25 9.0 1 0.0 ) ("MF" "M 24 x 2.0 Feingew." 11.0 12.0 2.0 11.0 12.0 1 0.0 ) ("MF" "M 36 x 1.5 Feingew." 17.25 18.0 1.5 17.25 9.0 1 0.0 ) ("MF" "M 300 x 4 Feingew." 148.0 150.0 1.5 148.0 24.0 1 0.0 ) ; Zollgewinde ("inch" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.8640 8 1 0.0 ) ("inch" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 6.5785 8 1 0.0 ) ("inch" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.864 8 1 0.0 ) ("inch" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 6.5785 8 1 0.0 ) ; British Standard Feingewinde - British Standard Fine ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; British Standard Withwort Grobgewinde - British Standard Withworth Coarse ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSW" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Zylindrisches British Standard Gewinde - British Standard Pipe ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("BSP" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Unifiziertes Grobgewinde - Unified National Coarse ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNC" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Unifiziertes Feingewinde - Unified National Fine ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("UNF" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Kegeliges Gasrohrgewinde 1:16 - National Taper Pipe 1:16 ("NPT" "Rp 1/8 (28 Gang/Zoll)" 4.2830 4.864 0.0907 4.864 6.0000 1 0.0 ) ("NPT" "Rp 1/4 (19 Gang/Zoll)" 5.7225 6.5785 1.3370 6.5785 8.0000 1 0.0 ) ("NPT" "Rp 3/8 (19 Gang/Zoll)" 7.4750 8.3310 1.3370 8.3310 8.0000 1 0.0 ) ("NPT" "Rp 1/2 (14 Gang/Zoll)" 9.3155 10.4775 1.8140 10.4775 11.000 1 0.0 ) ("NPT" "Rp 3/4 (14 Gang/Zoll)" 12.0585 13.2205 1.8140 13.2205 11.000 1 0.0 ) ; Rohrgewinde DIN EN 10226 ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Rp" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Rohrgewinde DIN ISO 228 ("G" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.4 8 1 0.0 ) ("G" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 5.9 8 1 0.0 ) ("G" "G 1/8 (28 Gang/Zoll)" 4.4 4.864 0.907 4.4 8 1 0.0 ) ("G" "G 1/4 (19 Gang/Zoll)" 5.9 6.5785 1.337 5.9 8 1 0.0 ) ; Panzerrohrgewinde - PG Gewinde DIN 40430 ("PG" "PG7" 5.6500 6.3000 1.2700 6.3000 9.0000 1 0.0 ) ("PG" "PG9" 6.9500 7.7500 1.4100 7.7500 9.0000 1 0.0 ) ("PG" "PG11" 8.6500 9.3000 1.4100 9.3000 9.0000 1 0.0 ) ("PG" "PG13,5" 9.500 10.200 1.4100 10.200 9.0000 1 0.0 ) ("PG" "PG16" 11.00 11.250 1.2700 11.250 9.0000 1 0.0 ) ("PG" "PG21" 13.00 14.150 1.5900 14.150 10.000 1 0.0 ) ("PG" "PG29" 17.50 18.500 1.5900 18.500 10.000 1 0.0 ) ("PG" "PG36" 22.750 23.500 1.5900 23.500 10.000 1 0.0 ) ("PG" "PG42" 26.250 27.000 1.5900 27.000 10.000 1 0.0 ) ("PG" "PG48" 28.900 29.650 1.5900 29.650 10.000 1 0.0 ) ; Trapezgewinde DIN 103 ("Trapezoid" "Tr 9x2" 3.5000 4.4100 2.0000 4.4100 6.0000 1 0.0 ) ("Trapezoid" "Tr 10x2" 4.0000 4.9100 2.0000 4.9100 6.0000 1 0.0 ) ("Trapezoid" "Tr 11x3" 4.0000 5.3820 3.0000 5.3820 9.0000 1 0.0 ) ("Trapezoid" "Tr 12x3" 4.5000 5.8820 3.0000 5.8820 9.0000 1 0.0 ) ("Trapezoid" "Tr 14x3" 5.5000 6.8820 3.0000 6.8820 9.0000 1 0.0 ) ("Trapezoid" "Tr 16x4" 6.0000 7.8500 4.0000 7.8500 12.0000 1 0.0 ) ("Trapezoid" "Tr 18x4" 7.0000 8.8500 4.0000 8.8500 12.0000 1 0.0 ) ("Trapezoid" "Tr 20x4" 8.0000 9.8500 4.0000 9.8500 12.0000 1 0.0 ) ("Trapezoid" "Tr 22x5" 8.5000 10.8325 5.0000 10.8325 15.0000 1 0.0 ) ("Trapezoid" "Tr 24x5" 9.5000 11.8325 5.0000 11.8325 15.0000 1 0.0 ) ("Trapezoid" "Tr 26x5" 10.500 12.8325 5.0000 12.8325 15.0000 1 0.0 ) ("Trapezoid" "Tr 28x5" 11.500 13.8325 5.0000 13.8325 15.0000 1 0.0 ) ; Trapezgewinde DIN 380 ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("FlatTrapezoid" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Sägegewinde DIN 513 ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Saw" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Rundgewinde ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Rundgewinde ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Round_Mining" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ; Edisongewinde ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ("Edison" "nicht definiert" 5.0000 6.0000 1.0000 6.0000 3.0000 1 0.0 ) ); end contents ); end sd-change-logical-table-contents (print "--- Machining Advisor Gewindetabellenerweiterung wurde erfolgreich geladen! ---")