/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     | Website:  https://openfoam.org
    \\  /    A nd           | Version:  9
     \\/     M anipulation  |
\*---------------------------------------------------------------------------*/
Build  : 9-89839ae3b8cd
Exec   : checkMesh -parallel -allGeometry
Date   : Jan 05 2022
Time   : 15:52:45
Host   : "user"
PID    : 1008
I/O    : uncollated
Case   : /mnt/d/1-OpenFoam/Aero/235_55/20-8_AMI
nProcs : 8
Slaves : 
7
(
"user.1009"
"user.1010"
"user.1011"
"user.1012"
"user.1013"
"user.1014"
"user.1015"
)

Pstream initialised with:
    floatTransfer      : 0
    nProcsSimpleSum    : 0
    commsType          : nonBlocking
    polling iterations : 0
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create polyMesh for time = 0

Enabling all geometry checks.

Time = 0

Mesh stats
    points:           3181076
    faces:            8120168
    internal faces:   7387228
    cells:            2496957
    faces per cell:   6.21052
    boundary patches: 11
    point zones:      0
    face zones:       2
    cell zones:       1

Overall number of cells of each type:
    hexahedra:     2079612
    prisms:        76351
    wedges:        2695
    pyramids:      0
    tet wedges:    3404
    tetrahedra:    5
    polyhedra:     334890
    Breakdown of polyhedra by number of faces:
        faces   number of cells
            4   39859
            5   28024
            6   51393
            7   49383
            8   12614
            9   106727
           10   61
           11   16
           12   34083
           13   3
           14   2
           15   11928
           17   2
           18   795

Checking topology...
    Boundary definition OK.
    Cell to face addressing OK.
    Point usage OK.
    Upper triangular ordering OK.
    Face vertices OK.
   *Number of regions: 2
    The mesh has multiple regions which are not connected by any face.
  <<Writing region information to "0/cellToRegion"
  <<Writing region 0 with 457721 cells to cellSet region0
  <<Writing region 1 with 2039236 cells to cellSet region1

Checking basic patch addressing...
                   Patch    Faces   Points Bounding box
                   inlet      190      231 (-1.552 -0.383 -0.388) (-1.552 0.383 1.164)
                  outlet      190      231 (3.492 -0.383 -0.388) (3.492 0.383 1.164)
                    left     1140     1344 (-1.552 0.383 -0.388) (3.492 0.383 1.164)
                   right     1140     1344 (-1.552 -0.383 -0.388) (3.492 -0.383 1.164)
                  bottom     9964    10818 (-1.552 -0.383 -0.388001) (3.492 0.383 -0.387957)
                     top      600      704 (-1.552 -0.383 1.164) (3.492 0.383 1.164)
                   felge   410088   457999 (-0.38798 -0.115 -0.388) (0.38798 0.115 0.387994)
                    AMI1    94670    99482 (-0.4 -0.150301 -0.388) (0.40132 0.15048 0.400226)
                    AMI2    94670    99441 (-0.4 -0.150301 -0.388) (0.40132 0.15048 0.400226)

Checking geometry...
    Overall domain bounding box (-1.552 -0.383 -0.388001) (3.492 0.383 1.164)
    Mesh has 3 geometric (non-empty/wedge) directions (1 1 1)
    Mesh has 3 solution (non-empty) directions (1 1 1)
    Boundary openness (-1.52734e-16 -5.66902e-18 -1.18313e-15) OK.
    Max cell openness = 4.00633e-16 OK.
    Max aspect ratio = 10.3314 OK.
    Minimum face area = 4.37253e-08. Maximum face area = 0.006884.  Face area magnitudes OK.
    Min volume = 2.83524e-10. Max volume = 0.000527702.  Total volume = 5.98873.  Cell volumes OK.
    Mesh non-orthogonality Max: 64.9986 average: 10.454
    Non-orthogonality check OK.
    Face pyramids OK.
 ***Max skewness = 14.7891, 9 highly skew faces detected which may impair the quality of the results
  <<Writing 9 skew faces to set skewFaces
    Coupled point location match (average 0) OK.
    Face tets OK.
    Min/max edge length = 8.65961e-06 0.0842083 OK.
  <<Writing 198448 near (closer than 5.33267e-06 apart) points to set nearPoints
   *There are 5849 faces with concave angles between consecutive edges. Max concave angle = 76.9948 degrees.
  <<Writing 5849 faces with concave angles to set concaveFaces
    Face flatness (1 = flat, 0 = butterfly) : min = 0.27404  average = 0.999063
   *There are 29 faces with ratio between projected and actual area < 0.8
    Minimum ratio (minimum flatness, maximum warpage) = 0.27404
  <<Writing 29 warped faces to set warpedFaces
    Cell determinant (wellposedness) : minimum: 0 average: 13.8164
 ***Cells with small determinant (< 0.001) found, number of cells: 79
  <<Writing 79 under-determined cells to set underdeterminedCells
 ***Concave cells (using face planes) found, number of cells: 111015
  <<Writing 111015 concave cells to set concaveCells
    Face interpolation weight : minimum: 0.0717911 average: 0.459604
    Face interpolation weight check OK.
    Face volume ratio : minimum: 0.0213336 average: 0.805136
    Face volume ratio check OK.
Calculating AMI weights between owner patch: AMI1 and neighbour patch: AMI2
AMI: Creating addressing and weights between 94670 source faces and 94670 target faces
AMI: Patch source sum(weights) min/max/average = 1, 2.00198, 1.00005
AMI: Patch target sum(weights) min/max/average = 1, 1.99467, 1.00005

Failed 3 mesh checks.

End

Finalising parallel run