Hi,
arbeite schon lange mit UGII (16 Jahre) und habe ein Problem mit NASTRAN und NX 4.0.3.3
Die Fa. BCT konnte mir nicht helfen.
Nach einem Modellscheck kommt:
-----------------------------------------------------------------
Nastran Model Check Completed
============================================================
Informationsliste erzeugt von : Steller
Datum : 05.02.2007 18:14:54
Aktuelles aktives Teil : e:\Projekte\.....\ln0000754834_sim1.sim
Knotenname : mm
============================================================
*** 18:14:57 ***
ERROR : Global Exception caught by Export
Export terminated because of error
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Das Lizensfile zeigt:
License Error: -5
No such feature exists.
Feature: UG13500_ug_nas_bn
License path: C:\LServer\UGNXFLEXlm\ugnx4.lic;27000@mm
FLEXnet Licensing error:-5,412
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
License Error: -5
No such feature exists.
Feature: ug_nas_bn
License path: C:\LServer\UGNXFLEXlm\ugnx4.lic;27000@mm
FLEXnet Licensing error:-5,412
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
--------------------------------------------------------
Das Lizensfile wurde aber wohl bei UGII erfolgreich getestet,
so daß vermutlich kein Lizensfehler vorliegt.
.... hatte jemand schon dieses Problem?
------------------
Alfi
Eine Antwort auf diesen Beitrag verfassen (mit Zitat/Zitat des Beitrags) IP